On Fri, Mar 17, 2017 at 04:47:43AM +0800, Icenowy Zheng wrote: > Allwinner V3s SoC have a display engine which have a different pipeline > with older SoCs. > > Add document for it (new compatibles and the new "mixer" part). > > The paragraph of TCON is also refactored, for furtherly add TCONs in > A83T/H3/A64/H5 that have only a channel 1 (used for HDMI or TV Encoder). > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx> > --- > .../bindings/display/sunxi/sun4i-drm.txt | 37 +++++++++++++++++++--- > 1 file changed, 33 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > index b82c00449468..2c293247c41d 100644 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > @@ -31,11 +31,11 @@ Required properties: > * allwinner,sun6i-a31-tcon > * allwinner,sun6i-a31s-tcon > * allwinner,sun8i-a33-tcon > + * allwinner,sun8i-v3s-tcon > - reg: base address and size of memory-mapped region > - interrupts: interrupt associated to this IP > - - clocks: phandles to the clocks feeding the TCON. Three are needed: > + - clocks: phandles to the clocks feeding the TCON > - 'ahb': the interface clocks > - - 'tcon-ch0': The clock driving the TCON channel 0 > - resets: phandles to the reset controllers driving the encoder > - "lcd": the reset line for the TCON channel 0 > > @@ -52,7 +52,12 @@ Required properties: > second the block connected to the TCON channel 1 (usually the TV > encoder) > > -On SoCs other than the A33, there is one more clock required: > +On TCONs that have a channel 0 (currently all TCONs supported), there > +is one more clock required: > + - 'tcon-ch0': The clock driving the TCON channel 0 > + > +On TCONs that have a channel 1 (currently all TCONs except the ones in > +A33 and V3s), there is one more clock required: > - 'tcon-ch1': The clock driving the TCON channel 1 > > DRC > @@ -137,6 +142,26 @@ Required properties: > Documentation/devicetree/bindings/media/video-interfaces.txt. The > first port should be the input endpoints, the second one the outputs > > +Display Engine 2.0 Mixer > +------------------------ > + > +The DE2 mixer have many functionalities, currently only layer blending is > +supported. > + > +Required properties: > + - compatible: value must be one of: > + * allwinner,sun8i-v3s-de2-mixer > + - reg: base address and size of the memory-mapped region. > + - clocks: phandles to the clocks feeding the frontend and backend > + * bus: the backend interface clock > + * ram: the backend DRAM clock > + - clock-names: the clock names mentioned above > + - resets: phandles to the reset controllers driving the backend > + > +- ports: A ports node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. The > + first port should be the input endpoints, the second one the output > + > > Display Engine Pipeline > ----------------------- > @@ -151,9 +176,13 @@ Required properties: > * allwinner,sun6i-a31-display-engine > * allwinner,sun6i-a31s-display-engine > * allwinner,sun8i-a33-display-engine > + * allwinner,sun8i-v3s-display-engine > > - allwinner,pipelines: list of phandle to the display engine > - frontends available. > + pipeline entry point. For SoCs with original DE (currently > + all SoCs supported by display engine except V3s), this > + phandle should be a display frontend or backend; for SoCs > + with DE2, this phandle should be a mixer. In the old ones, this should never be the backend. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
