On Wed, Mar 15, 2017 at 03:19:12PM +0800, Chris Zhong wrote:
> The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
> connected to DSI using four lanes.
>
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> ---
>
> Changes in v2: None
You added documentation for the 'reg' property :)
Looks OK to me.
Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
>
> .../bindings/display/panel/innolux,p079zca.txt | 23 ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> new file mode 100644
> index 0000000..5c70a83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> @@ -0,0 +1,23 @@
> +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "innolux,p079zca"
> +- reg: DSI virtual channel of the peripheral
> +- power-supply: phandle of the regulator that provides the supply voltage
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> +
> + &mipi_dsi {
> + panel {
> + compatible = "innolux,p079zca";
> + reg = <0>;
> + power-supply = <...>;
> + backlight = <&backlight>;
> + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> + };
> + };
> --
> 2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
