Hi Chris,
On Fri, Mar 03, 2017 at 09:01:48AM +0800, Chris Zhong wrote:
> The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
> connected to DSI using four lanes.
>
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> ---
>
> .../bindings/display/panel/innolux,p079zca.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> new file mode 100644
> index 0000000..c40c8e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> @@ -0,0 +1,22 @@
> +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "innolux,p079zca"
> +- power-supply: phandle of the regulator that provides the supply voltage
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> +
> + &mipi_dsi {
> + panel {
> + compatible = "innolux,p079zca";
> + reg = <0>;
Where's the documentation for this property?
Brian
> + power-supply = <...>;
> + backlight = <&backlight>;
> + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> + };
> + };
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
