On Fri, Mar 03, 2017 at 04:57:10PM +0100, Peter Senna Tschudin wrote:
> Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
> B850v3 dts file.
>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
> Cc: Martin Donnelly <martin.donnelly@xxxxxx>
> Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
> Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> Signed-off-by: Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx>
> ---
> Unchanged since V1.
>
> arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> index b237429..3ec54da 100644
> --- a/arch/arm/boot/dts/imx6q-b850v3.dts
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -72,6 +72,13 @@
> fsl,data-mapping = "spwg";
> fsl,data-width = <24>;
> status = "okay";
> +
> + port@4 {
> + reg = <4>;
Have a newline between property list and child node.
> + lvds0_out: endpoint {
> + remote-endpoint = <&stdp4028_in>;
> + };
> + };
> };
> };
>
> @@ -146,3 +153,64 @@
> &usdhc2 {
> status = "disabled";
> };
> +
> +&mux2_i2c2 {
> + status = "okay";
This okay status doesn't seem really necessary to me. If it does,
please put it at the end of property list.
> + clock-frequency = <100000>;
> +
> + stdp4028@73 {
> + compatible = "megachips,stdp4028-ge-b850v3-fw";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
Drop this newline, as in general we do not add newline in middle of
property list.
> + reg = <0x73>;
> +
Ditto
> + interrupt-parent = <&gpio2>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + stdp4028_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
Have a newline between nodes.
> + port@1 {
> + reg = <1>;
> + stdp4028_out: endpoint {
> + remote-endpoint = <&stdp2690_in>;
> + };
> + };
> + };
> + };
> +
> + stdp2690@72 {
Sort device nodes under bus in order of unit address. That said,
stdp2690@72 should go before stdp4028@73.
Shawn
> + compatible = "megachips,stdp2690-ge-b850v3-fw";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0x72>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + stdp2690_in: endpoint {
> + remote-endpoint = <&stdp4028_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + stdp2690_out: endpoint {
> + /* Connector for external display */
> + };
> + };
> + };
> + };
> +};
> --
> 2.9.3
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
