On Mon, Mar 13, 2017 at 2:41 PM, Christian König
<deathsimple@xxxxxxxxxxx> wrote:
> Most BIOS don't enable this because of compatibility reasons.
>
> Manually enable a 64bit BAR of 64GB size so that we have
> enough room for PCI devices.
> +static void pci_amd_enable_64bit_bar(struct pci_dev *dev)
> +{
> + const uint64_t size = 64ULL * 1024 * 1024 * 1024;
Perhaps extend <linux/sizes.h> and use SZ_64G here?
It would be nice to do, since some of the drivers already are using
sizes like 4GB and alike.
> + uint32_t base, limit, high;
> + struct resource *res;
> + unsigned i;
> + int r;
> +
> + for (i = 0; i < 8; ++i) {
> +
Redundant empty line.
> + pci_read_config_dword(dev, 0x80 + i * 0x8, &base);
> + pci_read_config_dword(dev, 0x180 + i * 0x4, &high);
> +
> + /* Is this slot free? */
> + if ((base & 0x3) == 0x0)
> + break;
> +
> + base >>= 8;
> + base |= high << 24;
> +
> + /* Abort if a slot already configures a 64bit BAR. */
> + if (base > 0x10000)
> + return;
> +
Ditto.
> + }
> +
Ditto.
> + if (i == 8)
> + return;
> +
> + res = kzalloc(sizeof(*res), GFP_KERNEL);
> + res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_MEM_64 |
> + IORESOURCE_WINDOW;
> + res->name = dev->bus->name;
> + r = allocate_resource(&iomem_resource, res, size, 0x100000000,
> + 0xfd00000000, size, NULL, NULL);
> + if (r) {
> + kfree(res);
> + return;
> + }
> +
> + base = ((res->start >> 8) & 0xffffff00) | 0x3;
> + limit = ((res->end + 1) >> 8) & 0xffffff00;
> + high = ((res->start >> 40) & 0xff) |
> + ((((res->end + 1) >> 40) & 0xff) << 16);
Perhaps some of constants can be replaced by defines (I think some of
them are already defined in ioport.h or somewhere else).
--
With Best Regards,
Andy Shevchenko
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
