On 3/3/2017 10:49 PM, Laurent Pinchart wrote:
Hello,
This patch series refactors all the PHY handling code in order to allow
support of vendor PHYs and Synopsys DWC HDMI 2.0 TX PHYs.
The series starts with a few cleanups and small fixes. Patch 01/10 just
removes unused code, patch 02/10 moves the color converter code out of the PHY
configure function as it isn't PHY-dependent, and patch 03/10 enables color
conversion even for DVI as it is needed to output RGB when the input format is
YUV.
The next two patches fix the power down (04/10) and up (05/10) sequences to
comply with the HDMI TX PHY specifications. They are the biggest functional
changes in the whole set, and have been tested successfully (with the rest of
the series) on i.MX6Q, RK3288 and R-Car H3. The PLL PHY lock delay has been
measured to be between 300µs and 350µs on R-Car H3, between 400µs and 600µs on
i.MX6Q and between 150µs and 450µs on RK3288. The PHY power down delay has
been measured to be less than 50µs on all platforms, and was often close to
instant with power down reported in the first poll iteration. We should thus
be more than safe with a 5ms timeout.
Patch 06/10 breaks the PHY operations out. Glue code is then allowed to pass a
PHY operations structure to support vendor PHYs. The existing PHY support code
is turned into a default Synopsys PHYs implementation for those PHY
operations.
Patch 07/10 further refactors the Synopsys PHY configuration function to make
it modular, in order to support DWC HDMI 2.0 TX PHYs that have a very
different register layout compared to the currently supported PHYs. Glue code
is again allowed to provide a custom PHY configuration implementation, with
the existing PHY support code turned into the default implementation for all
currently supported Synopsys PHYs.
Patch 08/10 is a small cleanup that removes the now unneeded device type for
glue code platform data, and patch 09/10 follows by switching the driver to
regmap in order to support vendor-specific register access more easily.
Patch 10/10 is a v5 addition that moves the code to a new directory per Jose's
request. v5 also picked up review tags from the mailing list, and is rebased
on top of the latest drm-misc-next branch. The series is otherwise unchanged
compared to v4.
Archit, how would you like to proceed to get this merged ?
Queued to drm-misc-next. Picked up the v5.1s where applicable. Resolved
some minor Kconfig/Makefile conflicts that came up because the
Megachips driver got pulled in first.
Thanks,
Archit
Kieran Bingham (2):
drm: bridge: dw-hdmi: Add support for custom PHY configuration
drm: bridge: dw-hdmi: Remove device type from platform data
Laurent Pinchart (6):
drm: bridge: dw-hdmi: Remove unused functions
drm: bridge: dw-hdmi: Move CSC configuration out of PHY code
drm: bridge: dw-hdmi: Fix the PHY power down sequence
drm: bridge: dw-hdmi: Fix the PHY power up sequence
drm: bridge: dw-hdmi: Create PHY operations
drm: bridge: dw-hdmi: Move the driver to a separate directory.
Neil Armstrong (2):
drm: bridge: dw-hdmi: Enable CSC even for DVI
drm: bridge: dw-hdmi: Switch to regmap for register access
drivers/gpu/drm/bridge/Kconfig | 2 +
drivers/gpu/drm/bridge/Makefile | 4 +-
drivers/gpu/drm/bridge/synopsys/Kconfig | 23 +
drivers/gpu/drm/bridge/synopsys/Makefile | 5 +
.../drm/bridge/{ => synopsys}/dw-hdmi-ahb-audio.c | 0
.../gpu/drm/bridge/{ => synopsys}/dw-hdmi-audio.h | 0
.../drm/bridge/{ => synopsys}/dw-hdmi-i2s-audio.c | 0
drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi.c | 467 ++++++++++++---------
drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi.h | 0
drivers/gpu/drm/imx/dw_hdmi-imx.c | 2 -
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 1 -
include/drm/bridge/dw_hdmi.h | 33 +-
12 files changed, 335 insertions(+), 202 deletions(-)
create mode 100644 drivers/gpu/drm/bridge/synopsys/Kconfig
create mode 100644 drivers/gpu/drm/bridge/synopsys/Makefile
rename drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi-ahb-audio.c (100%)
rename drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi-audio.h (100%)
rename drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi-i2s-audio.c (100%)
rename drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi.c (88%)
rename drivers/gpu/drm/bridge/{ => synopsys}/dw-hdmi.h (100%)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
