From: Douglas Anderson <dianders@xxxxxxxxxxxx> The comments in analogix_dp_init_aux() claim that we're disabling aux channel retries, but then right below it for Rockchip it sets them to 3. If we actually need 3 retries for Rockchip then we could adjust the comment, but it seems more likely that we want the same retry behavior across all platforms. Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx> Cc: 征增 王 <wzz@xxxxxxxxxxxxxx> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx> --- drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index 29d130222636..57dd1991d7de 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -480,15 +480,16 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp) analogix_dp_reset_aux(dp); - /* Disable AUX transaction H/W retry */ + /* AUX_BIT_PERIOD_EXPECTED_DELAY doesn't apply to Rockchip IP */ if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) - reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) | - AUX_HW_RETRY_COUNT_SEL(3) | - AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + reg = 0; else - reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | - AUX_HW_RETRY_COUNT_SEL(0) | - AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3); + + /* Disable AUX transaction H/W retry */ + reg |= AUX_HW_RETRY_COUNT_SEL(0) | + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL); /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ -- 2.12.0.246.ga2ecc84866-goog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
