Hi,
On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> The A10s has an HDMI controller connected to the second TCON channel. Add
> it to our DT.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++-
> arch/arm/boot/dts/sun5i.dtsi | 1 +-
> 2 files changed, 35 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
> index 074485782a4a..3482c9d2b120 100644
> --- a/arch/arm/boot/dts/sun5i-a10s.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
> @@ -72,7 +72,33 @@
> };
> };
>
> + display-engine {
> + compatible = "allwinner,sun5i-a10s-display-engine",
> + "allwinner,sun5i-a13-display-engine";
> + allwinner,pipelines = <&fe0>;
> + };
> +
> soc@01c00000 {
> + hdmi0: hdmi@01c16000 {
Nit: is the 0 suffix needed? I don't see any indication that there is
a second controller.
> + compatible = "allwinner,sun5i-a10s-hdmi";
> + reg = <0x01c16000 0x1000>;
> + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
> + <&ccu CLK_PLL_VIDEO0_2X>,
> + <&ccu CLK_PLL_VIDEO1_2X>;
> + clock-names = "ahb", "mod", "pll-0", "pll-1";
> + status = "disabled";
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi0_in_tcon0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&tcon0_out_hdmi0>;
> + };
> + };
> + };
> +
> pwm: pwm@01c20e00 {
> compatible = "allwinner,sun5i-a10s-pwm";
> reg = <0x01c20e00 0xc>;
> @@ -129,3 +155,11 @@
>
> &sram_a {
> };
> +
> +&tcon0_out {
> + tcon0_out_hdmi0: endpoint@2 {
> + reg = <2>;
> + remote-endpoint = <&hdmi0_in_tcon0>;
> + allwinner,tcon-channel = <1>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
> index f3b6e19244f9..3d009b2aa42a 100644
> --- a/arch/arm/boot/dts/sun5i.dtsi
> +++ b/arch/arm/boot/dts/sun5i.dtsi
> @@ -273,6 +273,7 @@
> tcon0_out_tve0: endpoint@1 {
> reg = <1>;
> remote-endpoint = <&tve0_in_tcon0>;
> + allwinner,tcon-channel = <1>;
This looks like a separate patch, probably following the binding change?
Regards
ChenYu
> };
> };
> };
> --
> git-series 0.8.11
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
