Currently we process page flip events on every display interrupt, however this does not take into consideration the processing time needed by the VSP1 utilised in the pipeline. Register a callback with the VSP driver to obtain completion events, and track them so that we only perform page flips when the full display pipeline has completed for the frame. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 8 ++++++-- drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 1 + drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 9 +++++++++ 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 2aceb84fc15d..caaaa1812e20 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -299,7 +299,7 @@ static void rcar_du_crtc_update_planes(struct rcar_du_crtc *rcrtc) * Page Flip */ -static void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc) +void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc) { struct drm_pending_vblank_event *event; struct drm_device *dev = rcrtc->crtc.dev; @@ -571,6 +571,7 @@ static const struct drm_crtc_funcs crtc_funcs = { static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) { struct rcar_du_crtc *rcrtc = arg; + struct rcar_du_device *rcdu = rcrtc->group->dev; irqreturn_t ret = IRQ_NONE; u32 status; @@ -579,7 +580,10 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) if (status & DSSR_FRM) { drm_crtc_handle_vblank(&rcrtc->crtc); - rcar_du_crtc_finish_page_flip(rcrtc); + + if (rcdu->info->gen < 3) + rcar_du_crtc_finish_page_flip(rcrtc); + ret = IRQ_HANDLED; } diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h index a7194812997e..ebdbff9d8e59 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h @@ -71,5 +71,6 @@ void rcar_du_crtc_resume(struct rcar_du_crtc *rcrtc); void rcar_du_crtc_route_output(struct drm_crtc *crtc, enum rcar_du_output output); +void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc); #endif /* __RCAR_DU_CRTC_H__ */ diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b0ff304ce3dc..cbb6f54c99ef 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c @@ -28,6 +28,13 @@ #include "rcar_du_kms.h" #include "rcar_du_vsp.h" +static void rcar_du_vsp_complete(void *private) +{ + struct rcar_du_crtc *crtc = (struct rcar_du_crtc *)private; + + rcar_du_crtc_finish_page_flip(crtc); +} + void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) { const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode; @@ -35,6 +42,8 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) struct vsp1_du_lif_config cfg = { .width = mode->hdisplay, .height = mode->vdisplay, + .callback = rcar_du_vsp_complete, + .callback_data = crtc, }; struct rcar_du_plane_state state = { .state = { -- git-series 0.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel