[Bug 97590] Fury X (Fiji) LEDs do not reflect GPU load

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 15 on bug 97590 from
(In reply to Vedran Miletić from comment #14)
> (In reply to Adam Bolte from comment #9)
> > The only difference between this patch and the Windows behaviour is with the
> > second card at idle - Windows will display only a single green LED which I
> > believe indicates the card is in its lowest power mode. I was unable to
> > reproduce that same status with your patch. However I'm guessing this means
> > Windows puts the unused card in to a lower power state than AMDGPU is
> > currently able, and the LEDs are actually doing the right thing. No big deal
> > either way.
> 
> Alex, can you comment on this? Is it a known issue?

Windows powers down dGPUs when they are not in use.  This is not supported yet
in Linux outside of PX systems.


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux