On Tue, Feb 28, 2017 at 4:07 AM, Yannick FERTRE <yannick.fertre@xxxxxx> wrote:
> On 02/24/2017 03:06 PM, Rob Herring wrote:
>> On Fri, Feb 24, 2017 at 2:18 AM, Yannick FERTRE <yannick.fertre@xxxxxx> wrote:
>>> On 02/21/2017 03:07 PM, Rob Herring wrote:
>>>> On Mon, Feb 20, 2017 at 5:01 AM, Yannick FERTRE <yannick.fertre@xxxxxx> wrote:
>>>>> On 02/16/2017 03:34 AM, Rob Herring wrote:
>>>>>> On Fri, Feb 10, 2017 at 03:54:44PM +0100, Yannick Fertre wrote:
>>>>>>> Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>
>>>>>>> ---
>>>>>>> .../bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt | 7 +++++++
>>>>>>> 1 file changed, 7 insertions(+)
>>>>>>> create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
[...]
>>>>> This binding is similar to all panel bindings which are link to panel
>>>>> simple. Details on gpio & power supply are describe with simple-panel
>>>>> binding.
>>>>
>>>> simple-panel.txt provides what possible standard properties there are,
>>>> not whether a panel uses them. The power supply needs to be explicit
>>>> because I don't know if you forgot and there's really 2 supplies or
>>>> you are using "power-supply" for a single supply.
>>>>
>>>> Rob
>>>>
>
>
> Hi Rob,
> ok, I'll push a V4 version with all details on properties.
> I write bellow a draft of binding:
>
> Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
>
> This binding is compatible with the simple-panel binding, which is specified
> in simple-panel.txt in this directory.
>
> Required properties:
> - compatible: should be "ampire,am-480272h3tmqw-t01h"
>
> Optional properties:
> - power-supply: regulator to provide the supply voltage
> - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
Doesn't look like there's any DDC connection to this panel.
> - enable-gpios: GPIO pin to enable or disable the panel
Need to state this is active high.
> - backlight: phandle of the backlight device attached to the panel
>
> Optional nodes:
> - Video port for RGB input.
>
> Example:
> panel_rgb: panel-rgb {
> compatible = "ampire,am-480272h3tmqw-t01h";
> enable-gpios = <&gpioa 8 1>;
> port {
> panel_in_rgb: endpoint {
> remote-endpoint = <&controler_out_rgb>;
> };
> };
> };
>
> Best regards
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
