On Wed, Feb 22, 2017 at 2:09 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > On Wed, Feb 22, 2017 at 11:23:06PM +0800, Icenowy Zheng wrote: >> Allwinner have a new "Display Engine 2.0" in there new SoCs, which comes >> in a new "Display Engine" (mixers instead of old backends and >> frontends). >> >> Add support for the mixer on Allwinner V3s SoC; it's the simplest one. >> >> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx> >> --- [...] >> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c >> new file mode 100644 >> index 000000000000..9427b57240d3 >> --- /dev/null >> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c >> @@ -0,0 +1,417 @@ >> +/* >> + * Copyright (C) 2017 Icenowy Zheng <icenowy@xxxxxxxx> >> + * >> + * Based on sun4i_backend.c, which is: >> + * Copyright (C) 2015 Free Electrons >> + * Copyright (C) 2015 NextThing Co >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of >> + * the License, or (at your option) any later version. >> + */ >> + >> +#include <drm/drmP.h> >> +#include <drm/drm_atomic_helper.h> >> +#include <drm/drm_crtc.h> >> +#include <drm/drm_crtc_helper.h> >> +#include <drm/drm_fb_cma_helper.h> >> +#include <drm/drm_gem_cma_helper.h> >> +#include <drm/drm_plane_helper.h> >> + >> +#include <linux/component.h> >> +#include <linux/reset.h> >> +#include <linux/of_device.h> >> + >> +#include "sun8i_mixer.h" >> +#include "sun4i_drv.h" >> + >> +#define SUN8I_DRAM_OFFSET 0x40000000 > > PHYS_OFFSET? PHYS_OFFSET is not portable. __pa(PAGE_OFFSET) instead. If your DMA addresses are different from CPU addresses (i.e. have some offset), then use "dma-ranges" in DT. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
