The bias, bandgap and PLL should all be configured before we enable them. Signed-off-by: John Keeping <john@xxxxxxxxxxxx> Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx> --- v4: - Add Sean's Reviewed-by v3: - Squash together two patches that both affect initialization order of the PHY Unchanged in v2 --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 78d676b7e516..4fee5176c606 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -413,12 +413,17 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin)); - dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div)); dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) | LOW_PROGRAM_EN); dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) | HIGH_PROGRAM_EN); + dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN); + + dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN | + BIASEXTR_SEL(BIASEXTR_127_7)); + dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN | + BANDGAP_SEL(BANDGAP_96_10)); dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT | BIAS_BLOCK_ON | BANDGAP_ON); @@ -429,10 +434,6 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) SETRD_MAX | POWER_MANAGE | TER_RESISTORS_ON); - dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN | - BIASEXTR_SEL(BIASEXTR_127_7)); - dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN | - BANDGAP_SEL(BANDGAP_96_10)); dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | 0xf); dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | 0x55); -- 2.12.0.rc0.230.gf625d4cdb9.dirty _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
