Some braces were missing causing an incorrect calculation.
Y.C. Chen from Aspeed provided me with the right formula
which I tested on AST2400 and 2500.
The MCLK isn't currently used by the driver (it will eventually
to filter modes) so the issue isn't catastrophic.
Also make the printed value a bit more meaningful
Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/ast/ast_main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index b593a53..eb6ba3e 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -341,7 +341,7 @@ static int ast_get_dram_info(struct drm_device *dev)
div = 0x1;
break;
}
- ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div * 1000);
+ ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000));
return 0;
}
@@ -485,7 +485,9 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
if (ret)
goto out_free;
ast->vram_size = ast_get_vram_info(dev);
- DRM_INFO("dram %d %d %d %08x\n", ast->mclk, ast->dram_type, ast->dram_bus_width, ast->vram_size);
+ DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
+ ast->mclk, ast->dram_type,
+ ast->dram_bus_width, ast->vram_size);
}
if (need_post)
--
2.9.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
