Regards Shashank On 2/8/2017 4:57 PM, Jose Abreu wrote:
Hi Shashank, On 07-02-2017 16:09, Sharma, Shashank wrote:Thanks for the review Jose, my comments inline. Regards Shashank On 2/7/2017 4:24 PM, Jose Abreu wrote:Hi Shashank, Sorry for the late review. On 06-02-2017 13:59, Shashank Sharma wrote:From: Thierry Reding <treding@xxxxxxxxxx> SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx> --- Documentation/gpu/drm-kms-helpers.rst | 12 ++++ drivers/gpu/drm/Makefile | 3 +- drivers/gpu/drm/drm_scdc_helper.c | 111 ++++++++++++++++++++++++++++ include/drm/drm_scdc_helper.h | 132 ++++++++++++++++++++++++++++++++++ 4 files changed, 257 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/drm_scdc_helper.c create mode 100644 include/drm/drm_scdc_helper.h diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 03040aa..7592756 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -217,6 +217,18 @@ EDID Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_edid.c :export: +SCDC Helper Functions Reference +=============================== + +.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c + :doc: scdc helpers + +.. kernel-doc:: include/drm/drm_scdc_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_scdc_helper.c + :export: + Rectangle Utilities Reference ============================= diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 92de399..ad91cd9 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -31,7 +31,8 @@ drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \ drm_kms_helper_common.o drm_dp_dual_mode_helper.o \ - drm_simple_kms_helper.o drm_modeset_helper.o + drm_simple_kms_helper.o drm_modeset_helper.o \ + drm_scdc_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c new file mode 100644 index 0000000..fe0e121 --- /dev/null +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/slab.h> + +#include <drm/drm_scdc_helper.h> + +/** + * DOC: scdc helpers + * + * Status and Control Data Channel (SCDC) is a mechanism introduced by the + * HDMI 2.0 specification. It is a point-to-point protocol that allows the + * HDMI source and HDMI sink to exchange data. The same I2C interface that + * is used to access EDID serves as the transport mechanism for SCDC. + */ + +#define SCDC_I2C_SLAVE_ADDRESS 0x54 + +/** + * drm_scdc_read - read a block of data from SCDC + * @adapter: I2C controller + * @offset: start offset of block to read + * @buffer: return location for the block to read + * @size: size of the block to read + * + * Reads a block of data from SCDC, starting at a given offset. + * + * Returns: + * The number of bytes read from SCDC or a negative error code on failure. + */ +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size) +{ + struct i2c_msg msgs[2] = { + { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1,.len = sizeof(offset) ?Technically correct, but wouldn't that mean that we are expecting to have I2C offsets with length more than one byte ?I just commented this because it would be more consistent but indeed you are correct. You can disregard my comment :) Best regards, Jose Miguel Abreu
Thanks, is everything else works for you, would you mind a r-b ? - Shashank
+ .buf = &offset, + }, { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = I2C_M_RD, + .len = size, + .buf = buffer, + } + }; + + return i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); +} +EXPORT_SYMBOL(drm_scdc_read); + +/** + * drm_scdc_write - write a block of data to SCDC + * @adapter: I2C controller + * @offset: start offset of block to write + * @buffer: block of data to write + * @size: size of the block to write + * + * Writes a block of data to SCDC, starting at a given offset. + * + * Returns: + * The number of bytes written to SCDC or a negative error code on failure. + */ +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size) +{ + struct i2c_msg msg = { + .addr = SCDC_I2C_SLAVE_ADDRESS, + .flags = 0, + .len = 1 + size,.len = sizeof(offset) + size ?Same as above.+ .buf = NULL, + }; + void *data; + int err; + + data = kmalloc(1 + size, GFP_TEMPORARY);Same as above.So on ...+ if (!data) + return -ENOMEM; + + msg.buf = data; + + memcpy(data, &offset, sizeof(offset)); + memcpy(data + 1, buffer, size);Same as above.So on ..Best regards, Jose Miguel Abreu- Shashank+ + err = i2c_transfer(adapter, &msg, 1); + + kfree(data); + + return err; +} +EXPORT_SYMBOL(drm_scdc_write); diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h new file mode 100644 index 0000000..93b07bc --- /dev/null +++ b/include/drm/drm_scdc_helper.h @@ -0,0 +1,132 @@ +/* + * Copyright (c) 2015 NVIDIA Corporation. All rights reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_SCDC_HELPER_H +#define DRM_SCDC_HELPER_H + +#include <linux/i2c.h> +#include <linux/types.h> + +#define SCDC_SINK_VERSION 0x01 + +#define SCDC_SOURCE_VERSION 0x02 + +#define SCDC_UPDATE_0 0x10 +#define SCDC_READ_REQUEST_TEST (1 << 2) +#define SCDC_CED_UPDATE (1 << 1) +#define SCDC_STATUS_UPDATE (1 << 0) + +#define SCDC_UPDATE_1 0x11 + +#define SCDC_TMDS_CONFIG 0x20 +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_40 (1 << 1) +#define SCDC_TMDS_BIT_CLOCK_RATIO_BY_10 (0 << 1) +#define SCDC_SCRAMBLING_ENABLE (1 << 0) + +#define SCDC_SCRAMBLER_STATUS 0x21 +#define SCDC_SCRAMBLING_STATUS (1 << 0) + +#define SCDC_CONFIG_0 0x30 +#define SCDC_READ_REQUEST_ENABLE (1 << 0) + +#define SCDC_STATUS_FLAGS_0 0x40 +#define SCDC_CH2_LOCK (1 < 3) +#define SCDC_CH1_LOCK (1 < 2) +#define SCDC_CH0_LOCK (1 < 1) +#define SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK) +#define SCDC_CLOCK_DETECT (1 << 0) + +#define SCDC_STATUS_FLAGS_1 0x41 + +#define SCDC_ERR_DET_0_L 0x50 +#define SCDC_ERR_DET_0_H 0x51 +#define SCDC_ERR_DET_1_L 0x52 +#define SCDC_ERR_DET_1_H 0x53 +#define SCDC_ERR_DET_2_L 0x54 +#define SCDC_ERR_DET_2_H 0x55 +#define SCDC_CHANNEL_VALID (1 << 7) + +#define SCDC_ERR_DET_CHECKSUM 0x56 + +#define SCDC_TEST_CONFIG_0 0xc0 +#define SCDC_TEST_READ_REQUEST (1 << 7) +#define SCDC_TEST_READ_REQUEST_DELAY(x) ((x) & 0x7f) + +#define SCDC_MANUFACTURER_IEEE_OUI 0xd0 +#define SCDC_MANUFACTURER_IEEE_OUI_SIZE 3 + +#define SCDC_DEVICE_ID 0xd3 +#define SCDC_DEVICE_ID_SIZE 8 + +#define SCDC_DEVICE_HARDWARE_REVISION 0xdb +#define SCDC_DEVICE_HARDWARE_REVISION_MAJOR(x) (((x) >> 4) & 0xf) +#define SCDC_DEVICE_HARDWARE_REVISION_MINOR(x) (((x) >> 0) & 0xf) + +#define SCDC_DEVICE_SOFTWARE_MAJOR_REVISION 0xdc +#define SCDC_DEVICE_SOFTWARE_MINOR_REVISION 0xdd + +#define SCDC_MANUFACTURER_SPECIFIC 0xde +#define SCDC_MANUFACTURER_SPECIFIC_SIZE 34 + +ssize_t drm_scdc_read(struct i2c_adapter *adapter, u8 offset, void *buffer, + size_t size); +ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, + const void *buffer, size_t size); + +/** + * drm_scdc_readb - read a single byte from SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Reads a single byte from SCDC. This is a convenience wrapper around the + * drm_scdc_read() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_readb(struct i2c_adapter *adapter, u8 offset, + u8 *value) +{ + return drm_scdc_read(adapter, offset, value, sizeof(*value)); +} + +/** + * drm_scdc_writeb - write a single byte to SCDC + * @adapter: I2C adapter + * @offset: offset of register to read + * @value: return location for the register value + * + * Writes a single byte to SCDC. This is a convenience wrapper around the + * drm_scdc_write() function. + * + * Returns: + * 0 on success or a negative error code on failure. + */ +static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, + u8 value) +{ + return drm_scdc_write(adapter, offset, &value, sizeof(value)); +} + +#endif
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
