Simply the code, use snprintf correctly and make sure that we memset
the rest of the segment if the memory size in the ELF file is larger
than the file size.
Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 60 +++++++++++++++++------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 5f8b368..23eeed2 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -31,11 +31,11 @@ static inline bool _check_segment(const struct elf32_phdr *phdr)
phdr->p_memsz);
}
-static int __pil_tz_load_image(struct platform_device *pdev,
+static int zap_load_segments(struct platform_device *pdev,
const struct firmware *mdt, const char *fwname,
void *fwptr, size_t fw_size, unsigned long fw_min_addr)
{
- char str[64] = { 0 };
+ char filename[64];
const struct elf32_hdr *ehdr = (struct elf32_hdr *) mdt->data;
const struct elf32_phdr *phdrs = (struct elf32_phdr *) (ehdr + 1);
const struct firmware *fw;
@@ -53,16 +53,18 @@ static int __pil_tz_load_image(struct platform_device *pdev,
offset = (phdr->p_paddr - fw_min_addr);
/* Request the file containing the segment */
- snprintf(str, sizeof(str) - 1, "%s.b%02d", fwname, i);
+ snprintf(filename, sizeof(filename), "%s.b%02d", fwname, i);
- ret = request_firmware(&fw, str, &pdev->dev);
+ ret = request_firmware(&fw, filename, &pdev->dev);
if (ret) {
- dev_err(&pdev->dev, "Failed to load segment %s\n", str);
+ dev_err(&pdev->dev, "Failed to load segment %s\n",
+ filename);
break;
}
if (offset + fw->size > fw_size) {
- dev_err(&pdev->dev, "Segment %s is too big\n", str);
+ dev_err(&pdev->dev, "Segment %s is too big\n",
+ filename);
ret = -EINVAL;
release_firmware(fw);
break;
@@ -70,15 +72,19 @@ static int __pil_tz_load_image(struct platform_device *pdev,
/* Copy the segment into place */
memcpy(fwptr + offset, fw->data, fw->size);
+
+ if (phdr->p_memsz > phdr->p_filesz)
+ memset(fwptr + fw->size, 0,
+ phdr->p_memsz - phdr->p_filesz);
release_firmware(fw);
}
return ret;
}
-static int _pil_tz_load_image(struct platform_device *pdev)
+static int zap_load_mdt(struct platform_device *pdev)
{
- char str[64] = { 0 };
+ char filename[64];
const char *fwname;
const struct elf32_hdr *ehdr;
const struct elf32_phdr *phdrs;
@@ -86,7 +92,6 @@ static int _pil_tz_load_image(struct platform_device *pdev)
phys_addr_t fw_min_addr, fw_max_addr;
dma_addr_t fw_phys;
size_t fw_size;
- u32 pas_id;
void *ptr;
int i, ret;
@@ -95,11 +100,10 @@ static int _pil_tz_load_image(struct platform_device *pdev)
if (!qcom_scm_is_available()) {
dev_err(&pdev->dev, "SCM is not available\n");
- return -EINVAL;
+ return -EPROBE_DEFER;
}
ret = of_reserved_mem_device_init(&pdev->dev);
-
if (ret) {
dev_err(&pdev->dev, "Unable to set up the reserved memory\n");
return ret;
@@ -112,17 +116,12 @@ static int _pil_tz_load_image(struct platform_device *pdev)
return -EINVAL;
}
- if (of_property_read_u32(pdev->dev.of_node, "qcom,pas-id", &pas_id)) {
- dev_err(&pdev->dev, "Could not read the pas ID\n");
- return -EINVAL;
- }
-
- snprintf(str, sizeof(str) - 1, "%s.mdt", fwname);
+ snprintf(filename, sizeof(filename), "%s.mdt", fwname);
/* Request the MDT file for the firmware */
- ret = request_firmware(&mdt, str, &pdev->dev);
+ ret = request_firmware(&mdt, filename, &pdev->dev);
if (ret) {
- dev_err(&pdev->dev, "Unable to load %s\n", str);
+ dev_err(&pdev->dev, "Unable to load %s\n", filename);
return ret;
}
@@ -151,7 +150,7 @@ static int _pil_tz_load_image(struct platform_device *pdev)
fw_size = (size_t) (fw_max_addr - fw_min_addr);
/* Verify the MDT header */
- ret = qcom_scm_pas_init_image(pas_id, mdt->data, mdt->size);
+ ret = qcom_scm_pas_init_image(13, mdt->data, mdt->size);
if (ret) {
dev_err(&pdev->dev, "Invalid firmware metadata\n");
goto out;
@@ -163,18 +162,19 @@ static int _pil_tz_load_image(struct platform_device *pdev)
goto out;
/* Set up the newly allocated memory region */
- ret = qcom_scm_pas_mem_setup(pas_id, fw_phys, fw_size);
+ ret = qcom_scm_pas_mem_setup(13, fw_phys, fw_size);
if (ret) {
dev_err(&pdev->dev, "Unable to set up firmware memory\n");
goto out;
}
- ret = __pil_tz_load_image(pdev, mdt, fwname, ptr, fw_size, fw_min_addr);
- if (!ret) {
- ret = qcom_scm_pas_auth_and_reset(pas_id);
- if (ret)
- dev_err(&pdev->dev, "Unable to authorize the image\n");
- }
+ ret = zap_load_segments(pdev, mdt, fwname, ptr, fw_size, fw_min_addr);
+ if (ret)
+ goto out;
+
+ ret = qcom_scm_pas_auth_and_reset(13);
+ if (ret)
+ dev_err(&pdev->dev, "Unable to authorize the image\n");
out:
if (ret && ptr)
@@ -502,14 +502,14 @@ static int a5xx_zap_shader_init(struct msm_gpu *gpu)
of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
/* Find the sub-node for the zap shader */
- node = of_find_node_by_name(pdev->dev.of_node, "qcom,zap-shader");
+ node = of_get_child_by_name(pdev->dev.of_node, "zap-shader");
if (!node) {
- DRM_ERROR("%s: qcom,zap-shader not found in device tree\n",
+ DRM_ERROR("%s: zap-shader not found in device tree\n",
gpu->name);
return -ENODEV;
}
- ret = _pil_tz_load_image(of_find_device_by_node(node));
+ ret = zap_load_mdt(of_find_device_by_node(node));
if (ret)
DRM_ERROR("%s: Unable to load the zap shader\n",
gpu->name);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
