On Sun, Jan 29, 2017 at 01:24:31PM +0000, John Keeping wrote: > Some panels need to be configured with commands sent over the MIPI link, > which they will do in the prepare hook. Call this after the PHY has > been initialized so that we are able to send commands to the panel. > Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx> > Signed-off-by: John Keeping <john@xxxxxxxxxxxx> > Reviewed-by: Chris Zhong <zyw@xxxxxxxxxxxxxx> > --- > v3: > - Add Chris' Reviewed-by > Unchanged in v2 > > drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c > index ddbc037e7ced..7ada6d8ed143 100644 > --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c > +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c > @@ -896,12 +896,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) > dw_mipi_dsi_dphy_timing_config(dsi); > dw_mipi_dsi_dphy_interface_config(dsi); > dw_mipi_dsi_clear_err(dsi); > - if (drm_panel_prepare(dsi->panel)) > - dev_err(dsi->dev, "failed to prepare panel\n"); > > dw_mipi_dsi_phy_init(dsi); > dw_mipi_dsi_wait_for_two_frames(mode); > > + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE); > + if (drm_panel_prepare(dsi->panel)) > + dev_err(dsi->dev, "failed to prepare panel\n"); > + > dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE); > drm_panel_enable(dsi->panel); > > -- > 2.11.0.197.gb556de5.dirty > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- Sean Paul, Software Engineer, Google / Chromium OS _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel