Turns out some VBIOSes don't actually set the bit in question in 2240c. Use the nv50-style detection to try avoiding running the vbios twice. Fixes: a6a0f67ca7aa ("drm/nouveau/devinit/gf100-: detect if BIOS invoked devinit") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97620 Cc: stable@xxxxxxxxxxxxxxx # v4.6+ Signed-off-by: Ilia Mirkin <imirkin@xxxxxxxxxxxx> --- Not sure if this is safe to do esp on GM20x+ boards? drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c index 8b1b34c..a568bbf 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gf100.c @@ -102,6 +102,25 @@ gf100_devinit_preinit(struct nvkm_devinit *base) * can use it as a reliable way to know whether we should run devinit. */ base->post = ((nvkm_rd32(device, 0x2240c) & BIT(1)) == 0); + + /* + * However some VBIOS init sequences miss this bit. So fall back to + * the nv50 method of checking if the bit is not set. Running the + * VBIOS multiple times may have detrimental effects. + */ + if (base->post) { + u64 disable = nvkm_devinit_disable(base); + /* magic to detect whether or not x86 vbios code has + * executed the devinit scripts to initialise the + * board. only works if there's a display engine. + */ + if (!(disable & (1ULL << NVKM_ENGINE_DISP))) { + if (nvkm_rdvgac(device, 0, 0x00) || + nvkm_rdvgac(device, 0, 0x1a)) { + base->post = false; + } + } + } } static const struct nvkm_devinit_func -- 2.10.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel