On 01/22/2017 12:31 AM, John Keeping wrote:
These values are specified as constant time periods but the PHY
configuration is in terms of the current lane byte clock so using
constant values guarantees that the timings will be outside the
specification with some display configurations.
Derive the necessary configuration from the byte clock in order to
ensure that the PHY configuration is correct.
Signed-off-by: John Keeping <john@xxxxxxxxxxxx>
---
Unchanged in v2
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 36 ++++++++++++++++++++++++++++++----
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index cfe7e4ba305c..12432e41971b 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -383,6 +383,26 @@ static void dw_mipi_dsi_phy_write(struct dw_mipi_dsi *dsi, u8 test_code,
dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
}
+/**
+ * ns2bc - Nanoseconds to byte clock cycles
+ */
+static inline unsigned int ns2bc(struct dw_mipi_dsi *dsi, int ns)
+{
+ unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+ return (ns * (byte_clk_khz / 1000) + 999) / 1000;
+}
+
+/**
+ * ns2ui - Nanoseconds to UI time periods
+ */
+static inline unsigned int ns2ui(struct dw_mipi_dsi *dsi, int ns)
+{
+ unsigned long byte_clk_khz = dsi->lane_mbps * MSEC_PER_SEC;
+
+ return (ns * (byte_clk_khz / 1000) + 999) / 1000;
+}
+
static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
{
int ret, testdin, vco, val;
@@ -434,10 +454,18 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
SETRD_MAX | POWER_MANAGE |
TER_RESISTORS_ON);
-
- dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | 0xf);
- dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | 0x55);
- dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | 0xa);
+ dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
+ dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
+ dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
+ dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
+ dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
+ dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
+
+ dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
+ dw_mipi_dsi_phy_write(dsi, 0x71, THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
WARNING: line over 80 characters
+ dw_mipi_dsi_phy_write(dsi, 0x72, THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
WARNING: line over 80 characters
+ dw_mipi_dsi_phy_write(dsi, 0x73, THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
WARNING: line over 80 characters
+ dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
