Also don't power up the DSI host at this point since this is not necessary in order to configure the PHY and we do so later when selecting video or command mode. Signed-off-by: John Keeping <john@xxxxxxxxxxxx> --- Unchanged in v2 --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index c2e0ba96e0a0..5b3068e9e8db 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -397,7 +397,10 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) return testdin; } - dsi_write(dsi, DSI_PWR_UP, POWERUP); + /* Start by clearing PHY state */ + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR); + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR); dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE | VCO_RANGE_CON_SEL(vco) | -- 2.11.0.197.gb556de5.dirty _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
