On Fri, 20 Jan 2017, Manasi Navare <manasi.d.navare@xxxxxxxxx> wrote: > On Fri, Jan 20, 2017 at 05:33:51PM +0200, Jani Nikula wrote: >> On Fri, 20 Jan 2017, Manasi Navare <manasi.d.navare@xxxxxxxxx> wrote: >> > v3: >> > * Fix the conventions in bit definitions (Jani Nikula) >> > v2: >> > * Add all the other DP Complianec TEST register defs (Jani Nikula) >> > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx >> > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> >> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx> >> > Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> >> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx> >> > --- >> > include/drm/drm_dp_helper.h | 64 +++++++++++++++++++++++++++++++++++++++++++++ >> > 1 file changed, 64 insertions(+) >> > >> > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h >> > index 0468135..7ab4153 100644 >> > --- a/include/drm/drm_dp_helper.h >> > +++ b/include/drm/drm_dp_helper.h >> > @@ -417,6 +417,70 @@ >> > #define DP_TEST_LANE_COUNT 0x220 >> > >> > #define DP_TEST_PATTERN 0x221 >> > +# define DP_NO_TEST_PATTERN 0x0 >> > +# define DP_COLOR_RAMP 0x1 >> > +# define DP_BLACK_AND_WHITE_VERTICAL_LINES 0x2 >> > +# define DP_COLOR_SQUARE 0x3 >> > + >> > +#define DP_TEST_H_TOTAL_HI 0x222 >> > +#define DP_TEST_H_TOTAl_LO 0x223 >> ^ >> Sorry, didn't notice it before, but the l in TOTAL is lower case. >> > > Oh yes even my eyes didnt catch this. > > >> > + >> > +#define DP_TEST_V_TOTAL_HI 0x224 >> > +#define DP_TEST_V_TOTAl_LO 0x225 >> ^ >> Ditto. >> >> > + >> > +#define DP_TEST_H_START_HI 0x226 >> > +#define DP_TEST_H_START_LO 0x227 >> > + >> > +#define DP_TEST_V_START_HI 0x228 >> > +#define DP_TEST_V_START_LO 0x229 >> > + >> > +#define DP_TEST_HSYNC_HI 0x22A >> > +# define DP_TEST_HSYNC_POLARITY (1 << 7) >> > +# define DP_TEST_HSYNC_WIDTH_HI_MASK (127 << 0) >> > +#define DP_TEST_HSYNC_WIDTH_LO 0x22B >> > + >> > +#define DP_TEST_VSYNC_HI 0x22C >> > +# define DP_TEST_VSYNC_POLARITY (1 << 7) >> > +# define DP_TEST_VSYNC_WIDTH_HI_MASK (127 << 0) >> > +#define DP_TEST_VSYNC_WIDTH_LO 0x22D >> > + >> > +#define DP_TEST_H_WIDTH_HI 0x22E >> > +#define DP_TEST_H_WIDTH_LO 0x22F >> > + >> > +#define DP_TEST_V_HEIGHT_HI 0x230 >> > +#define DP_TEST_V_HEIGHT_LO 0x231 >> > + >> > +#define DP_TEST_MISC0 0x232 >> > +# define DP_TEST_SYNC_CLOCK (1 << 0) >> > +# define DP_CLOCK_ASYNC 0x0 >> > +# define DP_CLOCK_SYNC 0x1 >> >> The above two are not necessary. >> > > Wont these above defs be required for checking if it is DP_CLOCK_ASYNC or SYNC? > I can remove the DP_CLOCK_SINK. If the bit is set, it's synchronous, and asynchronous otherwise? You don't need three macros to check one bit. > >> > +# define DP_TEST_COLOR_FORMAT_MASK (3 << 1) >> > +# define DP_TEST_COLOR_FORMAT_SHIFT 1 >> > +# define DP_COLOR_FORMAT_RGB (0 << 1) >> > +# define DP_COLOR_FORMAT_YCbCr422 (1 << 1) >> > +# define DP_COLOR_FORMAT_YCbCr444 (2 << 1) >> > +# define DP_TEST_DYNAMIC_RANGE (1 << 3) >> >> I'd just name this DP_TEST_DYNAMIC_RANGE_CEA... >> >> > +# define DP_VESA_RANGE (0 << 3) >> > +# define DP_CEA_RANGE (1 << 3) >> >> ...and drop these two. But whatever. >> > > But then how do I check for VESA? ...if it's not CEA, it's VESA? > >> > +# define DP_TEST_YCBCR_COEFFICIENTS (1 << 4) >> > +# define DP_YCBCR_COEFFICIENTS_ITU601 (0 << 4) >> > +# define DP_YCBCR_COEFFICIENTS_ITU709 (1 << 4) >> > +# define DP_TEST_BIT_DEPTH_MASK (7 << 5) >> > +# define DP_TEST_BIT_DEPTH_SHIFT 5 >> > +# define DP_TEST_BIT_DEPTH_6 (0 << 5) >> > +# define DP_TEST_BIT_DEPTH_8 (1 << 5) >> > +# define DP_TEST_BIT_DEPTH_10 (2 << 5) >> > +# define DP_TEST_BIT_DEPTH_12 (3 << 5) >> > +# define DP_TEST_BIT_DEPTH_16 (4 << 5) >> >> Blank line here. >> > > This blank line is on purpose since I am starting a diff register There was *no* blank line here, I meant you should add a blank line here. > > Manasi > > >> > +#define DP_TEST_MISC1 0x233 >> > +# define DP_TEST_REFRESH_DENOMINATOR (1 << 0) >> > +# define REFRESH_DENOMINATOR_1 0x0 >> > +# define REFRESH_DENOMINATOR_1_001 0x1 >> >> DP_ prefix. >> >> > +# define DP_TEST_INTERLACED (1 << 1) >> > +# define DP_NON_INTERLACED (0 << 1) >> > +# define DP_INTERLACED (1 << 1) >> >> No need for these two. DP_TEST_INTERLACED is sufficient. >> >> > + >> > +#define DP_TEST_REFRESH_RATE_NUMERATOR 0x234 >> > >> > #define DP_TEST_CRC_R_CR 0x240 >> > #define DP_TEST_CRC_G_Y 0x242 >> >> -- >> Jani Nikula, Intel Open Source Technology Center -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
