Hi Neil, ST may use this hardware IP also in other SoC, even that is not true now, I hope that "st" is a more futur proof name. Best regards Yannick Fertré On 01/16/2017 05:02 PM, Neil Armstrong wrote: > On 01/16/2017 02:28 PM, Yannick Fertre wrote: >> The purpose of this set of patches is to add a new driver for stm32f429. >> This driver was developed and tested on evaluation board stm32429i. >> >> Stm32f4 is a MCU platform which don't have MMU so the last patches developed >> by Benjamin Gaignard regarding "DRM: allow to use mmuless devices" >> are necessary. >> >> The board stm429i embeds a Ampire AM-480272H3TMQW-T01H screen. >> A new simple panel am-480272h3tmqw-t01h have been added to support it. >> >> Yannick Fertre (7): >> dt-bindings: display: add STM32 LTDC driver >> drm/st: Add STM32 LTDC driver >> dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel >> drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H >> ARM: dts: stm32f429: Add ltdc support >> ARM: dts: stm32429i-eval: Enable ltdc & simple panel on Eval board >> ARM: configs: Add STM32 LTDC support in STM32 defconfig >> >> .../display/panel/ampire,am-480272h3tmqw-t01h.txt | 7 + >> .../devicetree/bindings/display/st,ltdc.txt | 57 + >> arch/arm/boot/dts/stm32429i-eval.dts | 58 + >> arch/arm/boot/dts/stm32f429.dtsi | 25 +- >> arch/arm/configs/stm32_defconfig | 5 + >> drivers/gpu/drm/Kconfig | 2 + >> drivers/gpu/drm/Makefile | 1 + >> drivers/gpu/drm/panel/panel-simple.c | 29 + >> drivers/gpu/drm/st/Kconfig | 14 + >> drivers/gpu/drm/st/Makefile | 7 + >> drivers/gpu/drm/st/drv.c | 279 ++++ >> drivers/gpu/drm/st/drv.h | 25 + >> drivers/gpu/drm/st/ltdc.c | 1438 ++++++++++++++++++++ >> drivers/gpu/drm/st/ltdc.h | 20 + >> 14 files changed, 1966 insertions(+), 1 deletion(-) >> create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt >> create mode 100644 Documentation/devicetree/bindings/display/st,ltdc.txt >> create mode 100644 drivers/gpu/drm/st/Kconfig >> create mode 100644 drivers/gpu/drm/st/Makefile >> create mode 100644 drivers/gpu/drm/st/drv.c >> create mode 100644 drivers/gpu/drm/st/drv.h >> create mode 100644 drivers/gpu/drm/st/ltdc.c >> create mode 100644 drivers/gpu/drm/st/ltdc.h >> > > Hi Yannick, > > Shouldn't be more logical to use stm32 for the driver instead of st ? > It would eventually collude with the other STMicroelectronics SoCs and > will be aligned with other drivers like stm32-rtc, stm32-i2c, ... > > Neil > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
