From: Archit Taneja <architt@xxxxxxxxxxxxxx> On some adv7511 implementations, we can get some spurious disconnect signals which can cause monitor probing to fail. This patch enables HPD (hot plug detect) interrupt support which allows the monitor to be properly re-initialized when the spurious disconnect signal goes away. This also enables proper hotplug support. Cc: David Airlie <airlied@xxxxxxxx> Cc: Archit Taneja <architt@xxxxxxxxxxxxxx> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Tested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Originally-by: Archit Taneja <architt@xxxxxxxxxxxxxx> [jstultz: Added proper commit message] Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 7b2b5af..405e460 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -338,7 +338,7 @@ static void adv7511_power_on(struct adv7511 *adv7511) * Still, let's be safe and stick to the documentation. */ regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), - ADV7511_INT0_EDID_READY); + ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD); regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), ADV7511_INT1_DDC_ERROR); } @@ -846,6 +846,10 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge) if (adv->type == ADV7533) ret = adv7533_attach_dsi(adv); + if (adv->i2c_main->irq) + regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0), + ADV7511_INT0_HPD); + return ret; } -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
