Program EDP_PSR_DEBUG_CTL (PSR_MASK) to enable system
to go to deep sleep while in psr2.PSR2_STATUS bit 31:28
should report value 8 , if system enters deep sleep state.
Also, EDP_FRAMES_BEFORE_SU_ENTRY is set 1 , if not set,
flickering is observed on psr2 panel.
v2: (Ilia Mirkin)
- Remove duplicate bit definition 25:27
v3: rebase
v4: rebase
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
Signed-off-by: Patil Deepti <deepti.patil@xxxxxxxxx>
Reviewed-by: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 10 +++++++---
drivers/gpu/drm/i915/intel_psr.c | 31 ++++++++++++++++++++-----------
2 files changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7a325fb..6ad9f06 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3597,9 +3597,12 @@ enum {
#define EDP_PSR_PERF_CNT_MASK 0xffffff
#define EDP_PSR_DEBUG_CTL _MMIO(dev_priv->psr_mmio_base + 0x60)
-#define EDP_PSR_DEBUG_MASK_LPSP (1<<27)
-#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
-#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
+#define EDP_PSR_DEBUG_MASK_MAX_SLEEP (1<<28)
+#define EDP_PSR_DEBUG_MASK_LPSP (1<<27)
+#define EDP_PSR_DEBUG_MASK_MEMUP (1<<26)
+#define EDP_PSR_DEBUG_MASK_HPD (1<<25)
+#define EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (1<<16)
+#define EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN (1<<15)
#define EDP_PSR2_CTL _MMIO(0x6f900)
#define EDP_PSR2_ENABLE (1<<31)
@@ -3614,6 +3617,7 @@ enum {
#define EDP_PSR2_FRAME_BEFORE_SU_SHIFT 4
#define EDP_PSR2_FRAME_BEFORE_SU_MASK (0xf<<4)
#define EDP_PSR2_IDLE_MASK 0xf
+#define EDP_FRAMES_BEFORE_SU_ENTRY (1<<4)
#define EDP_PSR2_STATUS_CTL _MMIO(0x6f940)
#define EDP_PSR2_STATUS_STATE_MASK (0xf<<28)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index b582220..f9d620b 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -338,7 +338,9 @@ static void intel_enable_source_psr2(struct intel_dp *intel_dp)
/* FIXME: selective update is probably totally broken because it doesn't
* mesh at all with our frontbuffer tracking. And the hw alone isn't
* good enough. */
- val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+ val |= EDP_PSR2_ENABLE |
+ EDP_SU_TRACK_ENABLE |
+ EDP_FRAMES_BEFORE_SU_ENTRY;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR2_TP2_TIME_2500;
@@ -510,20 +512,27 @@ void intel_psr_enable(struct intel_dp *intel_dp)
if (dev_priv->psr.y_cord_support)
chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
I915_WRITE(CHICKEN_TRANS(TRANS_EDP), chicken);
+ I915_WRITE(EDP_PSR_DEBUG_CTL,
+ EDP_PSR_DEBUG_MASK_MEMUP |
+ EDP_PSR_DEBUG_MASK_HPD |
+ EDP_PSR_DEBUG_MASK_LPSP |
+ EDP_PSR_DEBUG_MASK_MAX_SLEEP |
+ EDP_PSR_DEBUG_MASK_DISP_REG_WRITE);
} else {
/* set up vsc header for psr1 */
hsw_psr_setup_vsc(intel_dp);
+ /*
+ * Per Spec: Avoid continuous PSR exit by masking MEMUP
+ * and HPD. also mask LPSP to avoid dependency on other
+ * drivers that might block runtime_pm besides
+ * preventing other hw tracking issues now we can rely
+ * on frontbuffer tracking.
+ */
+ I915_WRITE(EDP_PSR_DEBUG_CTL,
+ EDP_PSR_DEBUG_MASK_MEMUP |
+ EDP_PSR_DEBUG_MASK_HPD |
+ EDP_PSR_DEBUG_MASK_LPSP);
}
-
- /*
- * Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD.
- * Also mask LPSP to avoid dependency on other drivers that
- * might block runtime_pm besides preventing other hw tracking
- * issues now we can rely on frontbuffer tracking.
- */
- I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
- EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
-
/* Enable PSR on the panel */
hsw_psr_enable_sink(intel_dp);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
