On Wed, Jan 11, 2017 at 12:48 AM, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote: > Hi, > > On 01/04/2017 01:11 AM, John Stultz wrote: >> >> Hope everyone had a good newyears! >> >> Wanted to re-send out v3 of this patch set improving the EDID >> probing on the adv7511 used on HiKey, for consideration for >> merging for 4.11 >> >> The first three patches are fixups that are hopefully straight >> forward, integrating feedback I got from Laurant. >> >> The last two patches try to clean up and resue code, which as >> a side effect avoids an issue I'm seeing where something is >> going wrong with the regmap cache state for the >> ADV7511_REG_EDID_I2C_ADDR(0x43) register which results in >> i2c_transfer errors if we don't do the >> regcache_sync/_mark_dirty() calls. I suspect there might be a >> better solution there, but have not gotten any other suggestions >> so I wanted to go ahead and submit these. >> >> Thoughts and feedback would be appreciated! > > > Tested on DB410c on 4.10-rc3. Works well for me. Archit: Thanks for the testing! Is there anything else you need from me (or others) to queue this for 4.11? Or should I be submitting it to someone else? thanks -john _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
