Regards
Shashank
On 1/9/2017 4:41 PM, Jose Abreu wrote:
Hi Shashank,
Thanks for the review.
On 09-01-2017 05:22, Sharma, Shashank wrote:
Regards
Shashank
On 12/30/2016 10:23 PM, Jose Abreu wrote:
HDMI 2.0 introduces a new sampling mode called YCbCr 4:2:0.
According to the spec the EDID may contain two blocks that
signal this sampling mode:
- YCbCr 4:2:0 Video Data Block
- YCbCr 4:2:0 Video Capability Map Data Block
The video data block contains the list of vic's were
only YCbCr 4:2:0 sampling mode shall be used while the
video capability map data block contains a mask were
YCbCr 4:2:0 sampling mode may be used.
This RFC patch adds support for parsing these two new blocks
and introduces new flags to signal the drivers if the
mode is 4:2:0'only or 4:2:0'able.
The reason this is still a RFC is because there is no
reference in kernel for this new sampling mode (specially in
AVI infoframe part), so, I was hoping to hear some feedback
first.
Tested in a HDMI 2.0 compliance scenario.
Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Sean Paul <seanpaul@xxxxxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
drivers/gpu/drm/drm_edid.c | 139
+++++++++++++++++++++++++++++++++++++++++++-
drivers/gpu/drm/drm_modes.c | 10 +++-
include/uapi/drm/drm_mode.h | 6 ++
3 files changed, 151 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c
b/drivers/gpu/drm/drm_edid.c
index 67d6a73..6ce1a38 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2549,6 +2549,8 @@ static int drm_cvt_modes(struct
drm_connector *connector,
#define VENDOR_BLOCK 0x03
#define SPEAKER_BLOCK 0x04
#define VIDEO_CAPABILITY_BLOCK 0x07
+#define VIDEO_DATA_BLOCK_420 0x0E
+#define VIDEO_CAP_BLOCK_420 0x0F
#define EDID_BASIC_AUDIO (1 << 6)
#define EDID_CEA_YCRCB444 (1 << 5)
#define EDID_CEA_YCRCB422 (1 << 4)
@@ -3050,6 +3052,98 @@ static int add_3d_struct_modes(struct
drm_connector *connector, u16 structure,
return modes;
}
+static int add_420_mode(struct drm_connector *connector, u8
vic)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_display_mode *newmode;
+
+ if (!drm_valid_cea_vic(vic))
+ return 0;
+
+ newmode = drm_mode_duplicate(dev, &edid_cea_modes[vic]);
Sorry to start the review late, I missed this mail chain. It
would be great if you can please keep me in CC for this chain.
Sure. Will do that next time.
Practically, YUV420 modes are being used for 4k and UHD video
modes. Now here, when we want to
add these modes from edid_cea_db, using the VIC index, we
should have full list of cea_modes from 1 - 107
Particularly 93-107 ( which is for new 38x21 and 40x21 modes,
added in CEA-861-F). right now, edid_cea_modes
cant index 4k modes, so practically this this patch series will
do nothing (even though its doing everything right)
This is correct but not entirely true. I realize 4:2:0 is mostly
used in 4k modes but it can also be used in any other video mode,
as long as it is declared in the VCB.
I agree (that's why I called it practically).
As such I doubt we will find anything less than a 4k here, coz HDMI 1.4b
itself can driver 4k@30.
So the biggest benefit of YUV 420, which is half the clock, is mostly
useful in 4k@60 and above.
I guess we will see more cases of deep-color pixels at non-4k modes soon.
To handle this scenario, I had added a patch series
https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.freedesktop.org_patch_119627_&d=DgICaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=6JwJ_PEZj3MSeRaLTHuLtPZCb0uPPjUqR5raxY_qILI&s=DPBQ2MpLgngWGJEOg2v9CQhg2CSf_4LOIAC30B6AAyg&e=
(complete the cea modedb (VIC=65 onwards)) Now, this patch
series had dependency on new aspect ratios
being added in CEA-861-F which I tried to add in series
(https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.freedesktop.org_patch_116095_&d=DgICaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=6JwJ_PEZj3MSeRaLTHuLtPZCb0uPPjUqR5raxY_qILI&s=PX2M1hM2cF_aWiDe5oZeLWjsOgL-hvUR54Ion9kYMxM&e=
)
Which was added and later reverted by Ville
(https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.freedesktop.org_patch_119808_&d=DgICaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=6JwJ_PEZj3MSeRaLTHuLtPZCb0uPPjUqR5raxY_qILI&s=FAa6aHQ_HjlaVRzDm282p9bSY_tBiN1PngZBhsTqYdI&e=
).
Yes, I remember that. If it was breaking userspace then there was
nothing left to do, revert was needed.
As we discovered over the discussions, It dint break anything as such :)
But it made the behavior change for some SW's (which was expected),
Anyways its gone now.
I thing we should take
your patch and rework/extend it so that userspace does not break
as this is a most welcome feature. The new HDMI spec is almost
ready, and yet, 2.0 features are still missing from the kernel.
We should take advantage from our capability of accessing these
specs, test equipment, compliance equipment ... and submit
patches for these new features :)
I know. Unfortunately, last time when we spoke about it, we were
required to write a full stack code across kernel, drm, libdrm and X
level, as keeping it
under a cap was not accepted. This seems to be a long term plan to me.
In short, the method/sequence for effective development would be:
- Add aspect ratio support in DRM
- Add HDMI 2.0 (CEA-861-F) aspect ratios
(https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.freedesktop.org_patch_116095_&d=DgICaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=6JwJ_PEZj3MSeRaLTHuLtPZCb0uPPjUqR5raxY_qILI&s=PX2M1hM2cF_aWiDe5oZeLWjsOgL-hvUR54Ion9kYMxM&e=
)
- Complete edid_cea_modes, adding new modes as per 4k VICs
(https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.freedesktop.org_patch_119627_&d=DgICaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=6JwJ_PEZj3MSeRaLTHuLtPZCb0uPPjUqR5raxY_qILI&s=DPBQ2MpLgngWGJEOg2v9CQhg2CSf_4LOIAC30B6AAyg&e=
)
- Parse these modes from 420_vdb and 420_vcb using
edid_cea_modes db[] (This patch series)
I agree but this rfc does not depend (in terms of code) of any
other patches. The vcb parsing part can be used right now, as for
the vdb part we will have to wait until vic's list is completed.
Thats one of the reasons i sent it in RFC: So that i could ear
some comments before submitting a "real" patch.
Right, its so real code, that I forget almost every-time that its a RFC :-)
But I thought its the right place to call, that, we wont be able to test
4k YUV 420 yet, until we finish the modedb.
- Shashank
Best regards,
Jose Miguel Abreu
And that we should re-prioritize the aspect ratio handling to
target YUV 420 handling from CEA blocks.
Shashank
[snip]
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
