From: Hai Li <hali@xxxxxxxxxxxxxx>
The 14nm DSI PHY on 8x96 (called PHY v2 downstream) requires a different
set of calculations for computing D-PHY timing params. Create a
timing_calc_v2 func for the newer v2 PHYs.
Signed-off-by: Hai Li <hali@xxxxxxxxxxxxxx>
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 117 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 11 +++-
2 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index c9e1a79..11919bc 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -148,6 +148,123 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
return 0;
}
+int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ const unsigned long bit_rate = clk_req->bitclk_rate;
+ const unsigned long esc_rate = clk_req->escclk_rate;
+ s32 ui, ui_x8, lpx;
+ s32 tmax, tmin;
+ s32 pcnt0 = 50;
+ s32 pcnt1 = 50;
+ s32 pcnt2 = 10;
+ s32 pcnt3 = 30;
+ s32 pcnt4 = 10;
+ s32 pcnt5 = 2;
+ s32 coeff = 1000; /* Precision, should avoid overflow */
+ s32 hb_en, hb_en_ckln, pd_ckln, pd;
+ s32 val, val_ckln;
+ s32 temp;
+
+ if (!bit_rate || !esc_rate)
+ return -EINVAL;
+
+ timing->hs_halfbyte_en = 0;
+ hb_en = 0;
+ timing->hs_halfbyte_en_ckln = 0;
+ hb_en_ckln = 0;
+ timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
+ pd_ckln = timing->hs_prep_dly_ckln;
+ timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
+ pd = timing->hs_prep_dly;
+
+ val = (hb_en << 2) + (pd << 1);
+ val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
+
+ ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+ ui_x8 = ui << 3;
+ lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+ temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (95 * coeff - val_ckln * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+ temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
+ tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+ tmax = (tmin > 255) ? 511 : 255;
+ timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
+ tmin = max_t(s32, temp, 0);
+ temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
+ tmax = max_t(s32, temp, 0);
+ timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+ temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
+ tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+ tmax = 255;
+ timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+ tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
+ temp = 105 * coeff + 12 * ui - 20 * coeff;
+ tmax = (temp + 3 * ui) / ui_x8;
+ timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+ temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+ timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+ tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+ tmax = 255;
+ timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+ timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+ temp = 60 * coeff + 52 * ui - 43 * ui;
+ tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ timing->shared_timings.clk_post =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+
+ temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
+ temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
+ temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+ (((timing->hs_rqst_ckln << 3) + 8) * ui);
+ tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+ tmax = 63;
+ if (tmin > tmax) {
+ temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre = temp >> 1;
+ timing->shared_timings.clk_pre_inc_by_2 = 1;
+ } else {
+ timing->shared_timings.clk_pre =
+ linear_inter(tmax, tmin, pcnt2, 0, false);
+ timing->shared_timings.clk_pre_inc_by_2 = 0;
+ }
+
+ timing->ta_go = 3;
+ timing->ta_sure = 0;
+ timing->ta_get = 4;
+
+ DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+ timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+ timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+ timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+ timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+ timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+ timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+ timing->hs_prep_dly_ckln);
+
+ return 0;
+}
+
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask)
{
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 6472b60..feee870 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -64,6 +64,13 @@ struct msm_dsi_dphy_timing {
u32 ta_get;
struct msm_dsi_phy_shared_timings shared_timings;
+
+ /* For PHY v2 only */
+ u32 hs_rqst_ckln;
+ u32 hs_prep_dly;
+ u32 hs_prep_dly_ckln;
+ u8 hs_halfbyte_en;
+ u8 hs_halfbyte_en_ckln;
};
struct msm_dsi_phy {
@@ -88,7 +95,9 @@ struct msm_dsi_phy {
* PHY internal functions
*/
int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
- struct msm_dsi_phy_clk_request *clk_req);
+ struct msm_dsi_phy_clk_request *clk_req);
+int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
+ struct msm_dsi_phy_clk_request *clk_req);
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask);
int msm_dsi_phy_init_common(struct msm_dsi_phy *phy);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
