Re: [PATCH 06/10] drm/i915/psr: set CHICKEN_TRANS for psr2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2017-01-07 at 00:28 +0530, vathsala nagaraju wrote:
> As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15
> must be programmed.
> Enable bit 12 for programmable header packet.
> Enable bit 15 for Y cordinate support.
> 
> v2: (Rodrigo)
> - move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
> 
> v3:(Rodrigo)
> - initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
> 
> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
> Signed-off-by: vathsala nagaraju <vathsala.nagaraju@xxxxxxxxx>
> Signed-off-by: Patil Deepti <deepti.patil@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h  | 7 +++++++
>  drivers/gpu/drm/i915/intel_psr.c | 6 ++++++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 7830e6e..5ca506a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6449,6 +6449,13 @@ enum {
>  #define  BDW_DPRS_MASK_VBLANK_SRD	(1 << 0)
>  #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B)
>  
> +#define CHICKEN_TRANS_A         0x420c0
> +#define CHICKEN_TRANS_B         0x420c4
> +#define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A, CHICKEN_TRANS_B)
> +#define TRANS_EDP              3
> +#define CHICKEN_TRANS_BIT12    (1<<12)
> +#define CHICKEN_TRANS_BIT15    (1<<15)
> +
>  #define DISP_ARB_CTL	_MMIO(0x45000)
>  #define  DISP_FBC_MEMORY_WAKE		(1<<31)
>  #define  DISP_TILE_SURFACE_SWIZZLING	(1<<13)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index 7020f42..7573c2f 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -475,6 +475,8 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>  	struct drm_device *dev = intel_dig_port->base.base.dev;
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
> +	/* Set CHICKEN_TRANS_BIT12 for programable header */
> +	uint32_t chicken_trans = CHICKEN_TRANS_BIT12;

+ uint32_t chicken_trans;

>  
>  	if (!HAS_PSR(dev_priv)) {
>  		DRM_DEBUG_KMS("PSR not supported on this platform\n");
> @@ -505,6 +507,10 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>  				dev_priv->psr.psr2_support = false;
>  			else
>  				skl_psr_setup_su_vsc(intel_dp);
+
+	/* Set CHICKEN_TRANS_BIT12 for programable header */
+	chicken_trans = CHICKEN_TRANS_BIT12;
> +			/* Set CHICKEN_TRANS_BIT15 if Y coordinate is supported */
> +			if (dev_priv->psr.y_cord_support)
> +				chicken_trans |= CHICKEN_TRANS_BIT15;
> +			I915_WRITE(CHICKEN_TRANS(TRANS_EDP), chicken_trans);
>  		} else {
>  			/* set up vsc header for psr1 */
>  			hsw_psr_setup_vsc(intel_dp);

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux