Psr1 and psr2 are mutually exclusive,ie when psr2 is enabled,
psr1 should be disabled.When psr2 is exited , bit 31 of reg
PSR2_CTL must be set to 0 but currently bit 31 of SRD_CTL
(psr1 control register)is set to 0.
Also ,PSR2_IDLE state is looked up from SRD_STATUS(psr1 register)
instead of PSR2_STATUS register, which has wrong data, resulting
in blankscreen.
hsw_enable_source is split into hsw_enable_source_psr1 and
hsw_enable_source_psr2 for easier code review and maintenance,
as suggested by rodrigo and jim.
v2: (Vivi Rodrigo)
- Rename hsw_enable_source_psr* to intel_enable_source_psr*
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Cc: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
Signed-off-by: Patil Deepti <deepti.patil@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +
drivers/gpu/drm/i915/intel_psr.c | 124 +++++++++++++++++++++++++++++----------
2 files changed, 97 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 00970aa..7830e6e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3615,6 +3615,9 @@ enum {
#define EDP_PSR2_FRAME_BEFORE_SU_MASK (0xf<<4)
#define EDP_PSR2_IDLE_MASK 0xf
+#define EDP_PSR2_STATUS_CTL _MMIO(0x6f940)
+#define EDP_PSR2_STATUS_STATE_MASK (0xf<<28)
+
/* VGA port control */
#define ADPA _MMIO(0x61100)
#define PCH_ADPA _MMIO(0xe1100)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index c3aa649..d5e8bcc 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -261,12 +261,11 @@ static void vlv_psr_activate(struct intel_dp *intel_dp)
VLV_EDP_PSR_ACTIVE_ENTRY);
}
-static void hsw_psr_enable_source(struct intel_dp *intel_dp)
+static void intel_enable_source_psr1(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
-
uint32_t max_sleep_time = 0x1f;
/*
* Let's respect VBT in case VBT asks a higher idle_frame value.
@@ -312,14 +311,30 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
val |= EDP_PSR_TP1_TP2_SEL;
I915_WRITE(EDP_PSR_CTL, val);
+}
- if (!dev_priv->psr.psr2_support)
- return;
+static void intel_enable_source_psr2(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+
+ /*
+ * Let's respect VBT in case VBT asks a higher idle_frame value.
+ * Let's use 6 as the minimum to cover all known cases including
+ * the off-by-one issue that HW has in some cases. Also there are
+ * cases where sink should be able to train
+ * with the 5 or 6 idle patterns.
+ */
+ uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
+ uint32_t val = EDP_PSR_ENABLE;
+
+ val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
/* FIXME: selective update is probably totally broken because it doesn't
* mesh at all with our frontbuffer tracking. And the hw alone isn't
* good enough. */
- val = EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+ val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR2_TP2_TIME_2500;
@@ -333,6 +348,20 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
I915_WRITE(EDP_PSR2_CTL, val);
}
+
+static void hsw_psr_enable_source(struct intel_dp *intel_dp)
+{
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+
+ /* psr1 and psr2 are mutually exclusive.*/
+ if (dev_priv->psr.psr2_support)
+ intel_enable_source_psr2(intel_dp);
+ else
+ intel_enable_source_psr1(intel_dp);
+}
+
static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
@@ -410,7 +439,10 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
+ if (dev_priv->psr.psr2_support)
+ WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
+ else
+ WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
WARN_ON(dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
@@ -462,8 +494,6 @@ void intel_psr_enable(struct intel_dp *intel_dp)
dev_priv->psr.busy_frontbuffer_bits = 0;
if (HAS_DDI(dev_priv)) {
- hsw_psr_setup_vsc(intel_dp);
-
if (dev_priv->psr.psr2_support) {
/* PSR2 is restricted to work with panel resolutions upto 3200x2000 */
if (crtc->config->pipe_src_w > 3200 ||
@@ -471,8 +501,10 @@ void intel_psr_enable(struct intel_dp *intel_dp)
dev_priv->psr.psr2_support = false;
else
skl_psr_setup_su_vsc(intel_dp);
+ } else {
+ /* set up vsc header for psr1 */
+ hsw_psr_setup_vsc(intel_dp);
}
-
/*
* Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD.
* Also mask LPSP to avoid dependency on other drivers that
@@ -557,20 +589,37 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = to_i915(dev);
if (dev_priv->psr.active) {
- I915_WRITE(EDP_PSR_CTL,
- I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
+ if (dev_priv->psr.psr2_support)
+ I915_WRITE(EDP_PSR2_CTL,
+ I915_READ(EDP_PSR2_CTL) &
+ ~(EDP_PSR2_ENABLE |
+ EDP_SU_TRACK_ENABLE));
+ else
+ I915_WRITE(EDP_PSR_CTL,
+ I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
/* Wait till PSR is idle */
- if (intel_wait_for_register(dev_priv,
- EDP_PSR_STATUS_CTL,
- EDP_PSR_STATUS_STATE_MASK,
- 0,
- 2000))
+ if (dev_priv->psr.psr2_support) {
+ if (intel_wait_for_register(dev_priv,
+ EDP_PSR2_STATUS_CTL,
+ EDP_PSR2_STATUS_STATE_MASK,
+ 0,
+ 2000))
+ DRM_ERROR("Timed out waiting for PSR2 Idle State\n");
+ } else {
+ if (intel_wait_for_register(dev_priv,
+ EDP_PSR_STATUS_CTL,
+ EDP_PSR_STATUS_STATE_MASK,
+ 0,
+ 2000))
DRM_ERROR("Timed out waiting for PSR Idle State\n");
-
+ }
dev_priv->psr.active = false;
} else {
- WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
+ if (dev_priv->psr.psr2_support)
+ WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
+ else
+ WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
}
}
@@ -621,13 +670,24 @@ static void intel_psr_work(struct work_struct *work)
* and be ready for re-enable.
*/
if (HAS_DDI(dev_priv)) {
- if (intel_wait_for_register(dev_priv,
- EDP_PSR_STATUS_CTL,
- EDP_PSR_STATUS_STATE_MASK,
- 0,
- 50)) {
- DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
- return;
+ if (dev_priv->psr.psr2_support) {
+ if (intel_wait_for_register(dev_priv,
+ EDP_PSR2_STATUS_CTL,
+ EDP_PSR2_STATUS_STATE_MASK,
+ 0,
+ 50)) {
+ DRM_ERROR("Timed out waiting for PSR2 Idle for re-enable\n");
+ return;
+ }
+ } else {
+ if (intel_wait_for_register(dev_priv,
+ EDP_PSR_STATUS_CTL,
+ EDP_PSR_STATUS_STATE_MASK,
+ 0,
+ 50)) {
+ DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
+ return;
+ }
}
} else {
if (intel_wait_for_register(dev_priv,
@@ -669,11 +729,15 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
return;
if (HAS_DDI(dev_priv)) {
- val = I915_READ(EDP_PSR_CTL);
-
- WARN_ON(!(val & EDP_PSR_ENABLE));
-
- I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
+ if (dev_priv->psr.psr2_support) {
+ val = I915_READ(EDP_PSR2_CTL);
+ WARN_ON(!(val & EDP_PSR2_ENABLE));
+ I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
+ } else {
+ val = I915_READ(EDP_PSR_CTL);
+ WARN_ON(!(val & EDP_PSR_ENABLE));
+ I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
+ }
} else {
val = I915_READ(VLV_PSRCTL(pipe));
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
