On Wed, Jan 04, 2017 at 08:25:23PM -0800, Ben Widawsky wrote:
> On 17-01-04 20:42:32, Ville Syrjälä wrote:
> >From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> >SKL+ display engine can scan out certain kinds of compressed surfaces
> >produced by the render engine. This involved telling the display engine
> >the location of the color control surfae (CCS) which describes
> >which parts of the main surface are compressed and which are not. The
> >location of CCS is provided by userspace as just another plane with its
> >own offset.
> >
> >Add the required stuff to validate the user provided AUX plane metadata
> >and convert the user provided linear offset into something the hardware
> >can consume.
> >
> >Due to hardware limitations we require that the main surface and
> >the AUX surface (CCS) be part of the same bo. The hardware also
> >makes life hard by not allowing you to provide separate x/y offsets
> >for the main and AUX surfaces (excpet with NV12), so finding suitable
> >offsets for both requires a bit of work. Assuming we still want keep
> >playing tricks with the offsets. I've just gone with a dumb "search
> >backward for suitable offsets" approach, which is far from optimal,
> >but it works.
> >
> >Also not all planes will be capable of scanning out compressed surfaces,
> >and eg. 90/270 degree rotation is not supported in combination with
> >decompression either.
> >
> >This patch may contain work from at least the following people:
> >* Vandana Kannan <vandana.kannan@xxxxxxxxx>
> >* Daniel Vetter <daniel@xxxxxxxx>
> >* Ben Widawsky <ben@xxxxxxxxxxxx>
> >
> >Cc: Vandana Kannan <vandana.kannan@xxxxxxxxx>
> >Cc: Daniel Vetter <daniel@xxxxxxxx>
> >Cc: Ben Widawsky <ben@xxxxxxxxxxxx>
> >Cc: Jason Ekstrand <jason@xxxxxxxxxxxxxx>
> >Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >---
> > drivers/gpu/drm/i915/i915_reg.h | 22 ++++
> > drivers/gpu/drm/i915/intel_display.c | 219 +++++++++++++++++++++++++++++++++--
> > drivers/gpu/drm/i915/intel_pm.c | 8 +-
> > drivers/gpu/drm/i915/intel_sprite.c | 5 +
> > 4 files changed, 240 insertions(+), 14 deletions(-)
> >
> >diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> >index 00970aa77afa..05e18e742776 100644
> >--- a/drivers/gpu/drm/i915/i915_reg.h
> >+++ b/drivers/gpu/drm/i915/i915_reg.h
> >@@ -6209,6 +6209,28 @@ enum {
> > _ID(id, _PS_ECC_STAT_1A, _PS_ECC_STAT_2A), \
> > _ID(id, _PS_ECC_STAT_1B, _PS_ECC_STAT_2B))
> >
> >+#define PLANE_AUX_DIST_1_A 0x701c0
> >+#define PLANE_AUX_DIST_2_A 0x702c0
> >+#define PLANE_AUX_DIST_1_B 0x711c0
> >+#define PLANE_AUX_DIST_2_B 0x712c0
> >+#define _PLANE_AUX_DIST_1(pipe) \
> >+ _PIPE(pipe, PLANE_AUX_DIST_1_A, PLANE_AUX_DIST_1_B)
> >+#define _PLANE_AUX_DIST_2(pipe) \
> >+ _PIPE(pipe, PLANE_AUX_DIST_2_A, PLANE_AUX_DIST_2_B)
> >+#define PLANE_AUX_DIST(pipe, plane) \
> >+ _MMIO_PLANE(plane, _PLANE_AUX_DIST_1(pipe), _PLANE_AUX_DIST_2(pipe))
> >+
> >+#define PLANE_AUX_OFFSET_1_A 0x701c4
> >+#define PLANE_AUX_OFFSET_2_A 0x702c4
> >+#define PLANE_AUX_OFFSET_1_B 0x711c4
> >+#define PLANE_AUX_OFFSET_2_B 0x712c4
> >+#define _PLANE_AUX_OFFSET_1(pipe) \
> >+ _PIPE(pipe, PLANE_AUX_OFFSET_1_A, PLANE_AUX_OFFSET_1_B)
> >+#define _PLANE_AUX_OFFSET_2(pipe) \
> >+ _PIPE(pipe, PLANE_AUX_OFFSET_2_A, PLANE_AUX_OFFSET_2_B)
> >+#define PLANE_AUX_OFFSET(pipe, plane) \
> >+ _MMIO_PLANE(plane, _PLANE_AUX_OFFSET_1(pipe), _PLANE_AUX_OFFSET_2(pipe))
> >+
> > /* legacy palette */
> > #define _LGC_PALETTE_A 0x4a000
> > #define _LGC_PALETTE_B 0x4a800
> >diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> >index 38de9df0ec60..b547332eeda1 100644
> >--- a/drivers/gpu/drm/i915/intel_display.c
> >+++ b/drivers/gpu/drm/i915/intel_display.c
> >@@ -2064,11 +2064,19 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int plane)
> > return 128;
> > else
> > return 512;
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
> >+ if (plane == 1)
> >+ return 64;
> >+ /* fall through */
> > case I915_FORMAT_MOD_Y_TILED:
> > if (IS_GEN2(dev_priv) || HAS_128_BYTE_Y_TILING(dev_priv))
> > return 128;
> > else
> > return 512;
> >+ case I915_FORMAT_MOD_Yf_TILED_CCS:
> >+ if (plane == 1)
> >+ return 64;
> >+ /* fall through */
> > case I915_FORMAT_MOD_Yf_TILED:
> > /*
> > * Bspec seems to suggest that the Yf tile width would
> >@@ -2156,7 +2164,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
> > struct drm_i915_private *dev_priv = to_i915(fb->dev);
> >
> > /* AUX_DIST needs only 4K alignment */
> >- if (fb->format->format == DRM_FORMAT_NV12 && plane == 1)
> >+ if (plane == 1)
>
> This looks wrong at least within this context, surely multi-planar formats might
> have different alignment restrictions?
Nope. Well, NV12 being the only other case also requires 4k alignment
for AUX_DIST. Note that we don't actually support NV12, we just happen
to have some code for it which will become useful in the future (I hope).
>
> > return 4096;
> >
> > switch (fb->modifier) {
> >@@ -2166,6 +2174,8 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
> > if (INTEL_GEN(dev_priv) >= 9)
> > return 256 * 1024;
> > return 0;
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
> >+ case I915_FORMAT_MOD_Yf_TILED_CCS:
> > case I915_FORMAT_MOD_Y_TILED:
> > case I915_FORMAT_MOD_Yf_TILED:
> > return 1 * 1024 * 1024;
> >@@ -2472,6 +2482,7 @@ static unsigned int intel_fb_modifier_to_tiling(uint64_t fb_modifier)
> > case I915_FORMAT_MOD_X_TILED:
> > return I915_TILING_X;
> > case I915_FORMAT_MOD_Y_TILED:
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
>
> Is I915_FORMAT_MOD_Yf_TILED_CCS supposed to be here?
Nope. There's no fence tiling format for Yf.
>
> > return I915_TILING_Y;
> > default:
> > return I915_TILING_NONE;
> >@@ -2536,6 +2547,35 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
> >
> > intel_fb_offset_to_xy(&x, &y, fb, i);
> >
> >+ if ((fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> >+ fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) && i == 1) {
>
> In one of my branches I turned this into a macro/inline because I ended up
> checking it pretty often (if modifier is CCS type and plane == 1). Just a
> thought.
I think this might be the only place we check it now.
>
> >+ int main_x, main_y;
> >+ int ccs_x, ccs_y;
> >+
> >+ /*
> >+ * Each byte of CCS corresponds to a 16x8 area of the main surface, and
> >+ * each CCS tile is 64x64 bytes.
> >+ */
> >+ ccs_x = (x * 16) % (64 * 16);
> >+ ccs_y = (y * 8) % (64 * 8);
> >+ main_x = intel_fb->normal[0].x % (64 * 16);
> >+ main_y = intel_fb->normal[0].y % (64 * 8);
> >+
> >+ /*
> >+ * CCS doesn't have its own x/y offset register, so the intra CCS tile
> >+ * x/y offsets must match between CCS and the main surface.
> >+ */
> >+ if (main_x != ccs_x || main_y != ccs_y) {
> >+ DRM_DEBUG_KMS("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
> >+ main_x, main_y,
> >+ ccs_x, ccs_y,
> >+ intel_fb->normal[0].x,
> >+ intel_fb->normal[0].y,
> >+ x, y);
> >+ return -EINVAL;
> >+ }
> >+ }
> >+
> > /*
> > * The fence (if used) is aligned to the start of the object
> > * so having the framebuffer wrap around across the edge of the
> >@@ -2873,6 +2913,9 @@ static int skl_max_plane_width(const struct drm_framebuffer *fb, int plane,
> > break;
> > }
> > break;
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
> >+ case I915_FORMAT_MOD_Yf_TILED_CCS:
> >+ /* FIXME AUX plane? */
> > case I915_FORMAT_MOD_Y_TILED:
> > case I915_FORMAT_MOD_Yf_TILED:
> > switch (cpp) {
> >@@ -2895,6 +2938,42 @@ static int skl_max_plane_width(const struct drm_framebuffer *fb, int plane,
> > return 2048;
> > }
> >
> >+static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
> >+ int main_x, int main_y, u32 main_offset)
> >+{
> >+ const struct drm_framebuffer *fb = plane_state->base.fb;
> >+ int aux_x = plane_state->aux.x;
> >+ int aux_y = plane_state->aux.y;
> >+ u32 aux_offset = plane_state->aux.offset;
> >+ u32 alignment = intel_surf_alignment(fb, 1);
> >+
> >+ while (aux_offset >= main_offset && aux_y <= main_y) {
> >+ int x, y;
> >+
> >+ if (aux_x == main_x && aux_y == main_y)
> >+ break;
> >+
> >+ if (aux_offset == 0)
> >+ break;
> >+
> >+ x = aux_x / 16;
> >+ y = aux_y / 8;
> >+ aux_offset = intel_adjust_tile_offset(&x, &y, plane_state, 1,
> >+ aux_offset, aux_offset - alignment);
> >+ aux_x = x * 16 + aux_x % 16;
> >+ aux_y = y * 8 + aux_y % 8;
> >+ }
> >+
> >+ if (aux_x != main_x || aux_y != main_y)
> >+ return false;
> >+
> >+ plane_state->aux.offset = aux_offset;
> >+ plane_state->aux.x = aux_x;
> >+ plane_state->aux.y = aux_y;
> >+
> >+ return true;
> >+}
> >+
> > static int skl_check_main_surface(struct intel_plane_state *plane_state)
> > {
> > const struct drm_framebuffer *fb = plane_state->base.fb;
> >@@ -2937,7 +3016,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> >
> > while ((x + w) * cpp > fb->pitches[0]) {
> > if (offset == 0) {
> >- DRM_DEBUG_KMS("Unable to find suitable display surface offset\n");
> >+ DRM_DEBUG_KMS("Unable to find suitable display surface offset due to X-tiling\n");
> > return -EINVAL;
> > }
> >
> >@@ -2946,6 +3025,26 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> > }
> > }
> >
> >+ /*
> >+ * CCS AUX surface doesn't have its own x/y offsets, we must make sure
> >+ * they match with the main surface x/y offsets.
> >+ */
> >+ if (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> >+ fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) {
> >+ while (!skl_check_main_ccs_coordinates(plane_state, x, y, offset)) {
> >+ if (offset == 0)
> >+ break;
> >+
> >+ offset = intel_adjust_tile_offset(&x, &y, plane_state, 0,
> >+ offset, offset - alignment);
> >+ }
> >+
> >+ if (x != plane_state->aux.x || y != plane_state->aux.y) {
> >+ DRM_DEBUG_KMS("Unable to find suitable display surface offset due to CCS\n");
> >+ return -EINVAL;
> >+ }
> >+ }
> >+
> > plane_state->main.offset = offset;
> > plane_state->main.x = x;
> > plane_state->main.y = y;
> >@@ -2982,6 +3081,53 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
> > return 0;
> > }
> >
> >+static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)
> >+{
> >+ struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
> >+ struct intel_crtc *crtc = to_intel_crtc(plane_state->base.crtc);
> >+ int src_x = plane_state->base.src.x1 >> 16;
> >+ int src_y = plane_state->base.src.y1 >> 16;
> >+ int x = src_x / 16;
> >+ int y = src_y / 8;
> >+ u32 offset;
> >+
> >+ switch (plane->id) {
> >+ case PLANE_PRIMARY:
> >+ case PLANE_SPRITE0:
> >+ break;
> >+ default:
> >+ DRM_DEBUG_KMS("RC support only on plane 1 and 2\n");
> >+ return -EINVAL;
> >+ }
> >+
> >+ if (crtc->pipe == PIPE_C) {
> >+ DRM_DEBUG_KMS("No RC support on pipe C\n");
> >+ return -EINVAL;
> >+ }
> >+ /*
> >+ * TODO:
> >+ * 1. Disable stereo 3D when render decomp is enabled (bit 7:6)
> >+ * 2. Render decompression must not be used in VTd pass-through mode
> >+ * 3. Program hashing select CHICKEN_MISC1 bit 15
> >+ */
> >+
> >+ if (plane_state->base.rotation &&
> >+ plane_state->base.rotation & ~(DRM_ROTATE_0 | DRM_ROTATE_180)) {
> >+ DRM_DEBUG_KMS("RC support only with 0/180 degree rotation %x\n",
> >+ plane_state->base.rotation);
> >+ return -EINVAL;
> >+ }
> >+
> >+ intel_add_fb_offsets(&x, &y, plane_state, 1);
> >+ offset = intel_compute_tile_offset(&x, &y, plane_state, 1);
> >+
> >+ plane_state->aux.offset = offset;
> >+ plane_state->aux.x = x * 16 + src_x % 16;
> >+ plane_state->aux.y = y * 8 + src_y % 8;
> >+
> >+ return 0;
> >+}
> >+
> > int skl_check_plane_surface(struct intel_plane_state *plane_state)
> > {
> > const struct drm_framebuffer *fb = plane_state->base.fb;
> >@@ -3002,6 +3148,11 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state)
> > ret = skl_check_nv12_aux_surface(plane_state);
> > if (ret)
> > return ret;
> >+ } else if (fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> >+ fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS) {
> >+ ret = skl_check_ccs_aux_surface(plane_state);
> >+ if (ret)
> >+ return ret;
> > } else {
> > plane_state->aux.offset = ~0xfff;
> > plane_state->aux.x = 0;
> >@@ -3357,8 +3508,12 @@ u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
> > return PLANE_CTL_TILED_X;
> > case I915_FORMAT_MOD_Y_TILED:
> > return PLANE_CTL_TILED_Y;
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
> >+ return PLANE_CTL_TILED_Y | PLANE_CTL_DECOMPRESSION_ENABLE;
> > case I915_FORMAT_MOD_Yf_TILED:
> > return PLANE_CTL_TILED_YF;
> >+ case I915_FORMAT_MOD_Yf_TILED_CCS:
> >+ return PLANE_CTL_TILED_YF | PLANE_CTL_DECOMPRESSION_ENABLE;
> > default:
> > MISSING_CASE(fb_modifier);
> > }
> >@@ -3401,6 +3556,7 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
> > u32 plane_ctl;
> > unsigned int rotation = plane_state->base.rotation;
> > u32 stride = skl_plane_stride(fb, 0, rotation);
> >+ u32 aux_stride = skl_plane_stride(fb, 1, rotation);
> > u32 surf_addr = plane_state->main.offset;
> > int scaler_id = plane_state->scaler_id;
> > int src_x = plane_state->main.x;
> >@@ -3436,6 +3592,10 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
> > I915_WRITE(PLANE_OFFSET(pipe, plane_id), (src_y << 16) | src_x);
> > I915_WRITE(PLANE_STRIDE(pipe, plane_id), stride);
> > I915_WRITE(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
> >+ I915_WRITE(PLANE_AUX_DIST(pipe, plane_id),
> >+ (plane_state->aux.offset - surf_addr) | aux_stride);
> >+ I915_WRITE(PLANE_AUX_OFFSET(pipe, plane_id),
> >+ (plane_state->aux.y << 16) | plane_state->aux.x);
> >
> > if (scaler_id >= 0) {
> > uint32_t ps_ctrl = 0;
> >@@ -9807,10 +9967,16 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
> > fb->modifier = I915_FORMAT_MOD_X_TILED;
> > break;
> > case PLANE_CTL_TILED_Y:
> >- fb->modifier = I915_FORMAT_MOD_Y_TILED;
> >+ if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
> >+ fb->modifier = I915_FORMAT_MOD_Y_TILED_CCS;
> >+ else
> >+ fb->modifier = I915_FORMAT_MOD_Y_TILED;
> > break;
> > case PLANE_CTL_TILED_YF:
> >- fb->modifier = I915_FORMAT_MOD_Yf_TILED;
> >+ if (val & PLANE_CTL_DECOMPRESSION_ENABLE)
> >+ fb->modifier = I915_FORMAT_MOD_Yf_TILED_CCS;
> >+ else
> >+ fb->modifier = I915_FORMAT_MOD_Yf_TILED;
>
> I'm wondering if this is actually feasible. If we find compression enabled, I'd
> think we should just disable it.
Adding a more thorough plane readout support is somewhere on my todo list.
I think that would be step 1 in properly sanitizing the plane state (and
hopefully eliminating and the _noatomic() disable stuff).
>
> > break;
> > default:
> > MISSING_CASE(tiling);
> >@@ -12014,7 +12180,7 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
> > u32 ctl, stride = skl_plane_stride(fb, 0, rotation);
> >
> > ctl = I915_READ(PLANE_CTL(pipe, 0));
> >- ctl &= ~PLANE_CTL_TILED_MASK;
> >+ ctl &= ~(PLANE_CTL_TILED_MASK | PLANE_CTL_DECOMPRESSION_ENABLE);
> > switch (fb->modifier) {
> > case DRM_FORMAT_MOD_NONE:
> > break;
> >@@ -12024,9 +12190,15 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
> > case I915_FORMAT_MOD_Y_TILED:
> > ctl |= PLANE_CTL_TILED_Y;
> > break;
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
> >+ ctl |= PLANE_CTL_TILED_Y | PLANE_CTL_DECOMPRESSION_ENABLE;
> >+ break;
> > case I915_FORMAT_MOD_Yf_TILED:
> > ctl |= PLANE_CTL_TILED_YF;
> > break;
> >+ case I915_FORMAT_MOD_Yf_TILED_CCS:
> >+ ctl |= PLANE_CTL_TILED_YF | PLANE_CTL_DECOMPRESSION_ENABLE;
> >+ break;
> > default:
> > MISSING_CASE(fb->modifier);
> > }
> >@@ -15926,8 +16098,8 @@ static int intel_framebuffer_init(struct drm_device *dev,
> > {
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > unsigned int tiling = i915_gem_object_get_tiling(obj);
> >- int ret;
> >- u32 pitch_limit, stride_alignment;
> >+ int ret, i;
> >+ u32 pitch_limit;
> > struct drm_format_name_buf format_name;
> >
> > WARN_ON(!mutex_is_locked(&dev->struct_mutex));
> >@@ -15953,6 +16125,19 @@ static int intel_framebuffer_init(struct drm_device *dev,
> >
> > /* Passed in modifier sanity checking. */
> > switch (mode_cmd->modifier[0]) {
> >+ case I915_FORMAT_MOD_Y_TILED_CCS:
> >+ case I915_FORMAT_MOD_Yf_TILED_CCS:
> >+ switch (mode_cmd->pixel_format) {
> >+ case DRM_FORMAT_XBGR8888:
> >+ case DRM_FORMAT_ABGR8888:
> >+ case DRM_FORMAT_XRGB8888:
> >+ case DRM_FORMAT_ARGB8888:
> >+ break;
> >+ default:
> >+ DRM_DEBUG_KMS("RC supported only with RGB8888 formats\n");
> >+ return -EINVAL;
> >+ }
> >+ /* fall through */
> > case I915_FORMAT_MOD_Y_TILED:
> > case I915_FORMAT_MOD_Yf_TILED:
> > if (INTEL_GEN(dev_priv) < 9) {
> >@@ -16061,11 +16246,21 @@ static int intel_framebuffer_init(struct drm_device *dev,
> >
> > drm_helper_mode_fill_fb_struct(dev, &intel_fb->base, mode_cmd);
> >
> >- stride_alignment = intel_fb_stride_alignment(&intel_fb->base, 0);
> >- if (mode_cmd->pitches[0] & (stride_alignment - 1)) {
> >- DRM_DEBUG_KMS("pitch (%d) must be at least %u byte aligned\n",
> >- mode_cmd->pitches[0], stride_alignment);
> >- return -EINVAL;
> >+ for (i = 0; i < intel_fb->base.format->num_planes; i++) {
> >+ u32 stride_alignment;
> >+
> >+ if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
> >+ DRM_DEBUG_KMS("bad plane %d handle\n", i);
> >+ return -EINVAL;
> >+ }
> >+
> >+ stride_alignment = intel_fb_stride_alignment(&intel_fb->base, i);
> >+
> >+ if (mode_cmd->pitches[i] & (stride_alignment - 1)) {
> >+ DRM_DEBUG_KMS("plane %d pitch (%d) must be at least %u byte aligned\n",
> >+ i, mode_cmd->pitches[i], stride_alignment);
> >+ return -EINVAL;
> >+ }
> > }
> >
> > intel_fb->obj = obj;
> >diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> >index 249623d45be0..add359022c96 100644
> >--- a/drivers/gpu/drm/i915/intel_pm.c
> >+++ b/drivers/gpu/drm/i915/intel_pm.c
> >@@ -3314,7 +3314,9 @@ skl_ddb_min_alloc(const struct drm_plane_state *pstate,
> >
> > /* For Non Y-tile return 8-blocks */
> > if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
> >- fb->modifier != I915_FORMAT_MOD_Yf_TILED)
> >+ fb->modifier != I915_FORMAT_MOD_Yf_TILED &&
> >+ fb->modifier != I915_FORMAT_MOD_Y_TILED_CCS &&
> >+ fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)
> > return 8;
> >
> > src_w = drm_rect_width(&intel_pstate->base.src) >> 16;
> >@@ -3590,7 +3592,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
> > }
> >
> > y_tiled = fb->modifier == I915_FORMAT_MOD_Y_TILED ||
> >- fb->modifier == I915_FORMAT_MOD_Yf_TILED;
> >+ fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
> >+ fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> >+ fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
> > x_tiled = fb->modifier == I915_FORMAT_MOD_X_TILED;
> >
> > /* Display WA #1141: kbl. */
> >diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> >index 7031bc733d97..063a994815d0 100644
> >--- a/drivers/gpu/drm/i915/intel_sprite.c
> >+++ b/drivers/gpu/drm/i915/intel_sprite.c
> >@@ -210,6 +210,7 @@ skl_update_plane(struct drm_plane *drm_plane,
> > u32 surf_addr = plane_state->main.offset;
> > unsigned int rotation = plane_state->base.rotation;
> > u32 stride = skl_plane_stride(fb, 0, rotation);
> >+ u32 aux_stride = skl_plane_stride(fb, 1, rotation);
> > int crtc_x = plane_state->base.dst.x1;
> > int crtc_y = plane_state->base.dst.y1;
> > uint32_t crtc_w = drm_rect_width(&plane_state->base.dst);
> >@@ -248,6 +249,10 @@ skl_update_plane(struct drm_plane *drm_plane,
> > I915_WRITE(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
> > I915_WRITE(PLANE_STRIDE(pipe, plane_id), stride);
> > I915_WRITE(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
> >+ I915_WRITE(PLANE_AUX_DIST(pipe, plane_id),
> >+ (plane_state->aux.offset - surf_addr) | aux_stride);
> >+ I915_WRITE(PLANE_AUX_OFFSET(pipe, plane_id),
> >+ (plane_state->aux.y << 16) | plane_state->aux.x);
> >
> > /* program plane scaler */
> > if (plane_state->scaler_id >= 0) {
>
> Looks good. I haven't tested it.
> Reviewed-by: Ben Widawsky <ben@xxxxxxxxxxxx>
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
