Hi Jose, On Thursday 05 Jan 2017 10:33:55 Jose Abreu wrote: > On 05-01-2017 00:15, Laurent Pinchart wrote: > > On Tuesday 20 Dec 2016 15:01:52 Jose Abreu wrote: > >> On 20-12-2016 13:11, Laurent Pinchart wrote: > >>> On Tuesday 20 Dec 2016 11:39:21 Jose Abreu wrote: > >>>> On 20-12-2016 01:33, Laurent Pinchart wrote: > >>>>> Detect the PHY type and use it to handle the PHY type-specific SVSRET > >>>>> signal. > >>>>> > >>>>> Signed-off-by: Laurent Pinchart > >>>>> <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > >>>>> --- > >>>>> > >>>>> drivers/gpu/drm/bridge/dw-hdmi.c | 68 +++++++++++++++++++++++++++++-- > >>>>> include/drm/bridge/dw_hdmi.h | 10 ++++++ > >>>>> 2 files changed, 75 insertions(+), 3 deletions(-) > >>>>> > >>>>> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c > >>>>> b/drivers/gpu/drm/bridge/dw-hdmi.c index f4faa14213e5..ef4f2f96ed2c > >>>>> 100644 > >>>>> --- a/drivers/gpu/drm/bridge/dw-hdmi.c > >>>>> +++ b/drivers/gpu/drm/bridge/dw-hdmi.c > >> > >> [snip] > >> > >>> I don't have access to the documentation so I can't comment on that :-) > >>> What does the SVSRET signal control (and what does the name stand for) ? > >> > >> SVSRET stands for SVSRET :) (no idea what it means) Its a low > >> power mode of consumption. > >> > >>> By de-asserting PHY reset, do you mean > >>> > >>> /* PHY reset */ > >>> hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_DEASSERT, HDMI_MC_PHYRSTZ); > >>> hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_ASSERT, HDMI_MC_PHYRSTZ); > >>> > >>> ? HDMI_MC_PHYRSTZ_DEASSERT is defined as 0x01 and HDMI_MC_PHYRSTZ_ASSERT > >>> as 0x00, which I believe leads to correct operation on Gen2 PHYs, but is > >>> incorrect on Gen1 PHYs that have an active low reset signal. Could you > >>> confirm that ? The DEASSERT and ASSERT macros should be renamed as > >>> they're obviously incorrect. > >> > >> Correct. Older phys require PHYRSTZ to be deasserted (i.e. low) > >> for a PHY-dependent time. Newer phys require PHYRSTZ to be > >> asserted (i.e. high) for, again, a PHY-dependent time. > > > > Thanks for the confirmation, I'll rename the macros. > > > >> This is the kind of things that made me suggest you to extract > >> all the phy configuration from dw-hdmi. I think that having a > >> bunch of if's because of all the phy's that we need to support > >> does not make much sense. The downside is, of course, having code > >> duplicated. > > > > I agree with you in principle, but I'd rather do that when I'll have > > devices to test the code on. The three devices (soon to be) supported in > > mainline by the dw-hdmi drivers, i.MX6, RK3288 and R-Car Gen3, all use > > Gen2 PHYs, so I can't test the Gen1 code paths meaningfully at the > > moment. > > > >>> I can move the SVSRET assertion before PHY reset and test it on RK3288 > >>> and R-Car H3. > >> > >> Probably wont make much difference unless you have a way to > >> measure how much power the phy is consuming. But I think it is > >> the right thing to do according to docs. > > > > The init sequence is currently > > > > - Power the PHY off (TXPWRON = 0, PDDQ = 1) > > - Reset the PHY (through HDMI_MC_PHYRSTZ and HDMI_MC_HEACPHY_RST) > > - Configure the PHY through I2C > > - Power the PHY on (TXPWRON = 1, PDDQ = 0) > > - Set SVSRET > > - Wait for PHY PLL lock > > What I have here for the most recent phy we tested is this: > - Board specific configuration (should not be needed by you) > - Set MC_PHY_RST high > - Set TXPWRON = 0 > - Set PDDQ = 1 > - Set SVSRET = 0 > - Board specific impendance calibration reset (should not be > needed by you) > - Set SVSRET = 1 > - Set MC_PHY_RST low > - Configure phy through I2C > - Set PDDQ = 0 > - Set TXPWRON = 1, > - Wait for phy pll lock Thank you, I'll test that. > > I've tried moving SVSRET right before the reset and everything still seems > > to work fine, so I'll submit a patch. > > > > Is the rest of the sequence correct ? When should SVSRET be deasserted > > (the driver currently keeps it asserted at all times) ? > > It should not be deasserted. At all ? Even when powering the PHY down ? > > Speaking of reset, I believe support for HEAC PHYs is broken, given that > > the driver asserts the reset signal (through the HDMI_MC_HEACPHY_RST > > register) but never deasserts it. > > Hmm, probably, but not sure. I never tested this in older phys. One more item we'll fix when we'll be able to test it :-) > >> [snip] > >> > >>> The SoC datasheet mentions the SVSRET bit in the HDMI TX registers but > >>> doesn't document it any further. If I don't set SVSRET the HDMI output > >>> stays dead, so I assume I need to set it :-) > >> > >> Hmm, ok. I still haven't figured out which phy you are using so > >> can't comment much further. > > > > I'll then leave has_svsret set to true for DW_HDMI_PHY_DWC_HDMI20_TX_PHY > > as tests show it's needed. -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
