On 12/30/2016 2:18 AM, Daniel Vetter wrote:
I just learned that &struct_name.member_name works and looks pretty
even. It doesn't (yet) link to the member directly though, which would
be really good for big structures or vfunc tables (where the
per-member kerneldoc tends to be long).
Also some minor drive-by polish where it makes sense, I read a lot
of docs ...
Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
drivers/gpu/drm/drm_bridge.c | 27 +++++++++++--------------
include/drm/drm_bridge.h | 48 +++++++++++++++++++++++++-------------------
2 files changed, 39 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
index ae5e57ad718c..86a7637ba344 100644
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -55,7 +55,7 @@
* just provide additional hooks to get the desired output at the end of the
* encoder chain.
*
- * Bridges can also be chained up using the next pointer in &struct drm_bridge.
+ * Bridges can also be chained up using the &drm_bridge.next pointer.
*
* Both legacy CRTC helpers and the new atomic modeset helpers support bridges.
*/
@@ -179,7 +179,7 @@ void drm_bridge_detach(struct drm_bridge *bridge)
* @mode: desired mode to be set for the bridge
* @adjusted_mode: updated mode that works for this bridge
*
- * Calls ->mode_fixup() &drm_bridge_funcs op for all the bridges in the
+ * Calls &drm_bridge_funcs.mode_fixup for all the bridges in the
* encoder chain, starting from the first bridge to the last.
*
* Note: the bridge passed should be the one closest to the encoder
@@ -206,11 +206,10 @@ bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
EXPORT_SYMBOL(drm_bridge_mode_fixup);
/**
- * drm_bridge_disable - calls ->disable() &drm_bridge_funcs op for all
- * bridges in the encoder chain.
+ * drm_bridge_disable - disables all bridges in the encoder chain
* @bridge: bridge control structure
*
- * Calls ->disable() &drm_bridge_funcs op for all the bridges in the encoder
+ * Calls &drm_bridge_funcs.disable op for all the bridges in the encoder
* chain, starting from the last bridge to the first. These are called before
* calling the encoder's prepare op.
*
@@ -229,11 +228,10 @@ void drm_bridge_disable(struct drm_bridge *bridge)
EXPORT_SYMBOL(drm_bridge_disable);
/**
- * drm_bridge_post_disable - calls ->post_disable() &drm_bridge_funcs op for
- * all bridges in the encoder chain.
+ * drm_bridge_post_disable - cleans up after disabling all bridges in the encoder chain
* @bridge: bridge control structure
*
- * Calls ->post_disable() &drm_bridge_funcs op for all the bridges in the
+ * Calls &drm_bridge_funcs.post_disable op for all the bridges in the
* encoder chain, starting from the first bridge to the last. These are called
* after completing the encoder's prepare op.
*
@@ -258,7 +256,7 @@ EXPORT_SYMBOL(drm_bridge_post_disable);
* @mode: desired mode to be set for the bridge
* @adjusted_mode: updated mode that works for this bridge
*
- * Calls ->mode_set() &drm_bridge_funcs op for all the bridges in the
+ * Calls &drm_bridge_funcs.mode_set op for all the bridges in the
* encoder chain, starting from the first bridge to the last.
*
* Note: the bridge passed should be the one closest to the encoder
@@ -278,11 +276,11 @@ void drm_bridge_mode_set(struct drm_bridge *bridge,
EXPORT_SYMBOL(drm_bridge_mode_set);
/**
- * drm_bridge_pre_enable - calls ->pre_enable() &drm_bridge_funcs op for all
- * bridges in the encoder chain.
+ * drm_bridge_pre_enable - prepares for enabling all
+ * bridges in the encoder chain
* @bridge: bridge control structure
*
- * Calls ->pre_enable() &drm_bridge_funcs op for all the bridges in the encoder
+ * Calls &drm_bridge_funcs.pre_enable op for all the bridges in the encoder
* chain, starting from the last bridge to the first. These are called
* before calling the encoder's commit op.
*
@@ -301,11 +299,10 @@ void drm_bridge_pre_enable(struct drm_bridge *bridge)
EXPORT_SYMBOL(drm_bridge_pre_enable);
/**
- * drm_bridge_enable - calls ->enable() &drm_bridge_funcs op for all bridges
- * in the encoder chain.
+ * drm_bridge_enable - enables all bridges in the encoder chain
* @bridge: bridge control structure
*
- * Calls ->enable() &drm_bridge_funcs op for all the bridges in the encoder
+ * Calls &drm_bridge_funcs.enable op for all the bridges in the encoder
* chain, starting from the first bridge to the last. These are called
* after completing the encoder's commit op.
*
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index d3ca16f4da8f..1595a57dfbf2 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -87,18 +87,19 @@ struct drm_bridge_funcs {
* True if an acceptable configuration is possible, false if the modeset
* operation should be rejected.
*/
- bool (*mode_fixup)(struct drm_bridge *bridge,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode);
+ bool (*mode_fixup)(struct drm_bridge *bridge, const struct
+ drm_display_mode *mode, struct drm_display_mode
+ *adjusted_mode);
The change above doesn't seem to help with anything. Otherwise:
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
/**
* @disable:
*
* This callback should disable the bridge. It is called right before
* the preceding element in the display pipe is disabled. If the
* preceding element is a bridge this means it's called before that
- * bridge's ->disable() function. If the preceding element is a
- * &drm_encoder it's called right before the encoder's ->disable(),
- * ->prepare() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+ * bridge's @disable vfunc. If the preceding element is a &drm_encoder
+ * it's called right before the &drm_encoder_helper_funcs.disable,
+ * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms
+ * hook.
*
* The bridge can assume that the display pipe (i.e. clocks and timing
* signals) feeding it is still running when this callback is called.
@@ -110,12 +111,13 @@ struct drm_bridge_funcs {
/**
* @post_disable:
*
- * This callback should disable the bridge. It is called right after
- * the preceding element in the display pipe is disabled. If the
- * preceding element is a bridge this means it's called after that
- * bridge's ->post_disable() function. If the preceding element is a
- * &drm_encoder it's called right after the encoder's ->disable(),
- * ->prepare() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+ * This callback should disable the bridge. It is called right after the
+ * preceding element in the display pipe is disabled. If the preceding
+ * element is a bridge this means it's called after that bridge's
+ * @post_disable function. If the preceding element is a &drm_encoder
+ * it's called right after the encoder's
+ * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
+ * or &drm_encoder_helper_funcs.dpms hook.
*
* The bridge must assume that the display pipe (i.e. clocks and timing
* singals) feeding it is no longer running when this callback is
@@ -129,9 +131,11 @@ struct drm_bridge_funcs {
* @mode_set:
*
* This callback should set the given mode on the bridge. It is called
- * after the ->mode_set() callback for the preceding element in the
- * display pipeline has been called already. The display pipe (i.e.
- * clocks and timing signals) is off when this function is called.
+ * after the @mode_set callback for the preceding element in the display
+ * pipeline has been called already. If the bridge is the first element
+ * then this would be &drm_encoder_helper_funcs.mode_set. The display
+ * pipe (i.e. clocks and timing signals) is off when this function is
+ * called.
*/
void (*mode_set)(struct drm_bridge *bridge,
struct drm_display_mode *mode,
@@ -142,9 +146,10 @@ struct drm_bridge_funcs {
* This callback should enable the bridge. It is called right before
* the preceding element in the display pipe is enabled. If the
* preceding element is a bridge this means it's called before that
- * bridge's ->pre_enable() function. If the preceding element is a
- * &drm_encoder it's called right before the encoder's ->enable(),
- * ->commit() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+ * bridge's @pre_enable function. If the preceding element is a
+ * &drm_encoder it's called right before the encoder's
+ * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+ * &drm_encoder_helper_funcs.dpms hook.
*
* The display pipe (i.e. clocks and timing signals) feeding this bridge
* will not yet be running when this callback is called. The bridge must
@@ -161,9 +166,10 @@ struct drm_bridge_funcs {
* This callback should enable the bridge. It is called right after
* the preceding element in the display pipe is enabled. If the
* preceding element is a bridge this means it's called after that
- * bridge's ->enable() function. If the preceding element is a
- * &drm_encoder it's called right after the encoder's ->enable(),
- * ->commit() or ->dpms() hook from &struct drm_encoder_helper_funcs.
+ * bridge's @enable function. If the preceding element is a
+ * &drm_encoder it's called right after the encoder's
+ * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+ * &drm_encoder_helper_funcs.dpms hook.
*
* The bridge can assume that the display pipe (i.e. clocks and timing
* signals) feeding it is running when this callback is called. This
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
