Re: [Intel-gfx] [PATCH v4 30/38] drm: Compute tight evictions for drm_mm_scan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 22, 2016 at 08:36:33AM +0000, Chris Wilson wrote:
> Compute the minimal required hole during scan and only evict those nodes
> that overlap. This enables us to reduce the number of nodes we need to
> evict to the bare minimum.
> 
> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>

Again, for next time around pls cc: driver maintainers too.
-Daniel

> ---
>  drivers/gpu/drm/drm_mm.c                | 60 +++++++++++++++++++++++++++------
>  drivers/gpu/drm/etnaviv/etnaviv_mmu.c   |  2 +-
>  drivers/gpu/drm/i915/i915_gem_evict.c   |  3 +-
>  drivers/gpu/drm/selftests/test-drm_mm.c | 10 +++---
>  include/drm/drm_mm.h                    | 22 ++++++------
>  5 files changed, 71 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
> index 1b5613bcb35e..189ab84c5a59 100644
> --- a/drivers/gpu/drm/drm_mm.c
> +++ b/drivers/gpu/drm/drm_mm.c
> @@ -718,10 +718,10 @@ EXPORT_SYMBOL(drm_mm_replace_node);
>   * @color: opaque tag value to use for the allocation
>   * @start: start of the allowed range for the allocation
>   * @end: end of the allowed range for the allocation
> + * @flags: flags to specify how the allocation will be performed afterwards
>   *
>   * This simply sets up the scanning routines with the parameters for the desired
> - * hole. Note that there's no need to specify allocation flags, since they only
> - * change the place a node is allocated from within a suitable hole.
> + * hole.
>   *
>   * Warning:
>   * As long as the scan list is non-empty, no other operations than
> @@ -733,7 +733,8 @@ void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
>  				 u64 alignment,
>  				 unsigned long color,
>  				 u64 start,
> -				 u64 end)
> +				 u64 end,
> +				 unsigned int flags)
>  {
>  	DRM_MM_BUG_ON(start >= end);
>  	DRM_MM_BUG_ON(!size || size > end - start);
> @@ -744,6 +745,7 @@ void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
>  	scan->color = color;
>  	scan->alignment = alignment;
>  	scan->size = size;
> +	scan->flags = flags;
>  
>  	DRM_MM_BUG_ON(end <= start);
>  	scan->range_start = start;
> @@ -778,7 +780,7 @@ bool drm_mm_scan_add_block(struct drm_mm_scan *scan,
>  	DRM_MM_BUG_ON(node->mm != mm);
>  	DRM_MM_BUG_ON(!node->allocated);
>  	DRM_MM_BUG_ON(node->scanned_block);
> -	node->scanned_block = 1;
> +	node->scanned_block = true;
>  	mm->scan_active++;
>  
>  	hole = list_prev_entry(node, node_list);
> @@ -800,15 +802,53 @@ bool drm_mm_scan_add_block(struct drm_mm_scan *scan,
>  
>  	adj_start = max(col_start, scan->range_start);
>  	adj_end = min(col_end, scan->range_end);
> +	if (adj_end <= adj_start || adj_end - adj_start < scan->size)
> +		return false;
> +
> +	if (scan->flags == DRM_MM_CREATE_TOP)
> +		adj_start = adj_end - scan->size;
> +
> +	if (scan->alignment) {
> +		u64 rem;
> +
> +		div64_u64_rem(adj_start, scan->alignment, &rem);
> +		if (rem) {
> +			adj_start -= rem;
> +			if (scan->flags != DRM_MM_CREATE_TOP)
> +				adj_start += scan->alignment;
> +			if (adj_start < max(col_start, scan->range_start) ||
> +			    min(col_end, scan->range_end) - adj_start < scan->size)
> +				return false;
> +
> +			if (adj_end <= adj_start ||
> +			    adj_end - adj_start < scan->size)
> +				return false;
> +		}
> +	}
>  
> -	if (check_free_hole(adj_start, adj_end,
> -			    scan->size, scan->alignment)) {
> +	if (mm->color_adjust) {
> +		/* If allocations need adjusting due to neighbouring colours,
> +		 * we do not have enough information to decide if we need
> +		 * to evict nodes on either side of [adj_start, adj_end].
> +		 * What almost works is
> +		 * hit_start = adj_start + (hole_start - col_start);
> +		 * hit_end = adj_start + scan->size + (hole_end - col_end);
> +		 * but because the decision is only made on the final hole,
> +		 * we may underestimate the required adjustments for an
> +		 * interior allocation.
> +		 */
>  		scan->hit_start = hole_start;
>  		scan->hit_end = hole_end;
> -		return true;
> +	} else {
> +		scan->hit_start = adj_start;
> +		scan->hit_end = adj_start + scan->size;
>  	}
>  
> -	return false;
> +	DRM_MM_BUG_ON(scan->hit_start >= scan->hit_end);
> +	DRM_MM_BUG_ON(scan->hit_start < hole_start);
> +	DRM_MM_BUG_ON(scan->hit_end > hole_end);
> +
> +	return true;
>  }
>  EXPORT_SYMBOL(drm_mm_scan_add_block);
>  
> @@ -836,7 +876,7 @@ bool drm_mm_scan_remove_block(struct drm_mm_scan *scan,
>  
>  	DRM_MM_BUG_ON(node->mm != scan->mm);
>  	DRM_MM_BUG_ON(!node->scanned_block);
> -	node->scanned_block = 0;
> +	node->scanned_block = false;
>  
>  	DRM_MM_BUG_ON(!node->mm->scan_active);
>  	node->mm->scan_active--;
> @@ -846,7 +886,7 @@ bool drm_mm_scan_remove_block(struct drm_mm_scan *scan,
>  	prev_node->hole_follows = node->scanned_preceeds_hole;
>  	list_add(&node->node_list, &prev_node->node_list);
>  
> -	return (drm_mm_hole_node_end(node) > scan->hit_start &&
> +	return (node->start + node->size > scan->hit_start &&
>  		node->start < scan->hit_end);
>  }
>  EXPORT_SYMBOL(drm_mm_scan_remove_block);
> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_mmu.c b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c
> index fe1e886dcabb..2dae3169ce48 100644
> --- a/drivers/gpu/drm/etnaviv/etnaviv_mmu.c
> +++ b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c
> @@ -135,7 +135,7 @@ static int etnaviv_iommu_find_iova(struct etnaviv_iommu *mmu,
>  		}
>  
>  		/* Try to retire some entries */
> -		drm_mm_scan_init(&scan, &mmu->mm, size, 0, 0);
> +		drm_mm_scan_init(&scan, &mmu->mm, size, 0, 0, 0);
>  
>  		found = 0;
>  		INIT_LIST_HEAD(&list);
> diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
> index 77ded288534b..2741498cdf2b 100644
> --- a/drivers/gpu/drm/i915/i915_gem_evict.c
> +++ b/drivers/gpu/drm/i915/i915_gem_evict.c
> @@ -128,7 +128,8 @@ i915_gem_evict_something(struct i915_address_space *vm,
>  	 */
>  	drm_mm_scan_init_with_range(&scan, &vm->mm,
>  				    min_size, alignment, cache_level,
> -				    start, end);
> +				    start, end,
> +				    flags & PIN_HIGH ? DRM_MM_CREATE_TOP : 0);
>  
>  	/* Retire before we search the active list. Although we have
>  	 * reasonable accuracy in our retirement lists, we may have
> diff --git a/drivers/gpu/drm/selftests/test-drm_mm.c b/drivers/gpu/drm/selftests/test-drm_mm.c
> index 997f2bc93b9b..1bbfc24342c5 100644
> --- a/drivers/gpu/drm/selftests/test-drm_mm.c
> +++ b/drivers/gpu/drm/selftests/test-drm_mm.c
> @@ -1199,7 +1199,7 @@ static bool evict_nothing(struct drm_mm *mm,
>  	struct drm_mm_node *node;
>  	unsigned int n;
>  
> -	drm_mm_scan_init(&scan, mm, 1, 0, 0);
> +	drm_mm_scan_init(&scan, mm, 1, 0, 0, 0);
>  	for (n = 0; n < total_size; n++) {
>  		e = &nodes[n];
>  		list_add(&e->link, &evict_list);
> @@ -1246,7 +1246,7 @@ static bool evict_everything(struct drm_mm *mm,
>  	unsigned int n;
>  	int err;
>  
> -	drm_mm_scan_init(&scan, mm, total_size, 0, 0);
> +	drm_mm_scan_init(&scan, mm, total_size, 0, 0, 0);
>  	for (n = 0; n < total_size; n++) {
>  		e = &nodes[n];
>  		list_add(&e->link, &evict_list);
> @@ -1296,7 +1296,8 @@ static int evict_something(struct drm_mm *mm,
>  
>  	drm_mm_scan_init_with_range(&scan, mm,
>  				    size, alignment, 0,
> -				    range_start, range_end);
> +				    range_start, range_end,
> +				    mode->create_flags);
>  	if (!evict_nodes(&scan,
>  			 nodes, order, count,
>  			 &evict_list))
> @@ -1874,7 +1875,8 @@ static int evict_color(struct drm_mm *mm,
>  
>  	drm_mm_scan_init_with_range(&scan, mm,
>  				    size, alignment, color,
> -				    range_start, range_end);
> +				    range_start, range_end,
> +				    mode->create_flags);
>  	if (!evict_nodes(&scan,
>  			 nodes, order, count,
>  			 &evict_list))
> diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
> index bae0f10da8e3..606336fc229a 100644
> --- a/include/drm/drm_mm.h
> +++ b/include/drm/drm_mm.h
> @@ -120,6 +120,7 @@ struct drm_mm_scan {
>  	struct drm_mm_node *prev_scanned_node;
>  
>  	unsigned long color;
> +	unsigned int flags;
>  };
>  
>  /**
> @@ -388,11 +389,9 @@ __drm_mm_interval_first(const struct drm_mm *mm, u64 start, u64 last);
>  
>  void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
>  				 struct drm_mm *mm,
> -				 u64 size,
> -				 u64 alignment,
> -				 unsigned long color,
> -				 u64 start,
> -				 u64 end);
> +				 u64 size, u64 alignment, unsigned long color,
> +				 u64 start, u64 end,
> +				 unsigned int flags);
>  
>  /**
>   * drm_mm_scan_init - initialize lru scanning
> @@ -401,10 +400,10 @@ void drm_mm_scan_init_with_range(struct drm_mm_scan *scan,
>   * @size: size of the allocation
>   * @alignment: alignment of the allocation
>   * @color: opaque tag value to use for the allocation
> + * @flags: flags to specify how the allocation will be performed afterwards
>   *
>   * This simply sets up the scanning routines with the parameters for the desired
> - * hole. Note that there's no need to specify allocation flags, since they only
> - * change the place a node is allocated from within a suitable hole.
> + * hole.
>   *
>   * Warning:
>   * As long as the scan list is non-empty, no other operations than
> @@ -414,10 +413,13 @@ static inline void drm_mm_scan_init(struct drm_mm_scan *scan,
>  				    struct drm_mm *mm,
>  				    u64 size,
>  				    u64 alignment,
> -				    unsigned long color)
> +				    unsigned long color,
> +				    unsigned int flags)
>  {
> -	drm_mm_scan_init_with_range(scan, mm, size, alignment, color,
> -				    0, U64_MAX);
> +	drm_mm_scan_init_with_range(scan, mm,
> +				    size, alignment, color,
> +				    0, U64_MAX,
> +				    flags);
>  }
>  
>  bool drm_mm_scan_add_block(struct drm_mm_scan *scan,
> -- 
> 2.11.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux