Hi Laurent,
On 20-12-2016 01:33, Laurent Pinchart wrote:
> Detect the PHY type and use it to handle the PHY type-specific SVSRET
> signal.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/dw-hdmi.c | 68 ++++++++++++++++++++++++++++++++++++++--
> include/drm/bridge/dw_hdmi.h | 10 ++++++
> 2 files changed, 75 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
> index f4faa14213e5..ef4f2f96ed2c 100644
> --- a/drivers/gpu/drm/bridge/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw-hdmi.c
> @@ -113,6 +113,12 @@ struct dw_hdmi_i2c {
> bool is_regaddr;
> };
>
> +struct dw_hdmi_phy_data {
> + enum dw_hdmi_phy_type type;
> + const char *name;
> + bool has_svsret;
> +};
> +
> struct dw_hdmi {
> struct drm_connector connector;
> struct drm_bridge bridge;
> @@ -134,7 +140,9 @@ struct dw_hdmi {
> u8 edid[HDMI_EDID_LEN];
> bool cable_plugin;
>
> + const struct dw_hdmi_phy_data *phy;
> bool phy_enabled;
> +
> struct drm_display_mode previous_mode;
>
> struct i2c_adapter *ddc;
> @@ -1015,7 +1023,8 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, int cscon)
> dw_hdmi_phy_gen2_txpwron(hdmi, 1);
> dw_hdmi_phy_gen2_pddq(hdmi, 0);
>
> - if (hdmi->dev_type == RK3288_HDMI)
> + /* The DWC MHL and HDMI 2.0 PHYs need the SVSRET signal to be set. */
> + if (hdmi->phy->has_svsret)
> dw_hdmi_phy_enable_svsret(hdmi, 1);
I didn't review the original code but according to the docs the
svsret signal should be set before de-asserting phy reset.
>
> /*Wait for PHY PLL lock */
> @@ -1840,6 +1849,54 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static const struct dw_hdmi_phy_data dw_hdmi_phys[] = {
> + {
> + .type = DW_HDMI_PHY_DWC_HDMI_TX_PHY,
> + .name = "DWC HDMI TX PHY",
> + }, {
> + .type = DW_HDMI_PHY_DWC_MHL_PHY_HEAC,
> + .name = "DWC MHL PHY + HEAC PHY",
> + .has_svsret = true,
> + }, {
> + .type = DW_HDMI_PHY_DWC_MHL_PHY,
> + .name = "DWC MHL PHY",
> + .has_svsret = true,
> + }, {
> + .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
> + .name = "DWC HDMI 3D TX PHY + HEAC PHY",
> + }, {
> + .type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
> + .name = "DWC HDMI 3D TX PHY",
> + }, {
> + .type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
> + .name = "DWC HDMI 2.0 TX PHY",
> + .has_svsret = true,
Hmm, what I have here is that only MHL phys have svsret. Is this
case for your phy?
Best regards,
Jose Miguel Abreu
> + }
> +};
> +
> +static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
> +{
> + unsigned int i;
> + u8 phy_type;
> +
> + phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID);
> +
> + for (i = 0; i < ARRAY_SIZE(dw_hdmi_phys); ++i) {
> + if (dw_hdmi_phys[i].type == phy_type) {
> + hdmi->phy = &dw_hdmi_phys[i];
> + return 0;
> + }
> + }
> +
> + if (phy_type == DW_HDMI_PHY_VENDOR_PHY)
> + dev_err(hdmi->dev, "Unsupported vendor HDMI PHY\n");
> + else
> + dev_err(hdmi->dev, "Unsupported HDMI PHY type (%02x)\n",
> + phy_type);
> +
> + return -ENODEV;
> +}
> +
> static struct dw_hdmi *
> __dw_hdmi_probe(struct platform_device *pdev,
> const struct dw_hdmi_plat_data *plat_data)
> @@ -1950,9 +2007,14 @@ __dw_hdmi_probe(struct platform_device *pdev,
> goto err_iahb;
> }
>
> - dev_info(dev, "Detected HDMI TX controller v%x.%03x %s HDCP\n",
> + ret = dw_hdmi_detect_phy(hdmi);
> + if (ret < 0)
> + goto err_iahb;
> +
> + dev_info(dev, "Detected HDMI TX controller v%x.%03x %s HDCP (%s)\n",
> hdmi->version >> 12, hdmi->version & 0xfff,
> - prod_id1 & HDMI_PRODUCT_ID1_HDCP ? "with" : "without");
> + prod_id1 & HDMI_PRODUCT_ID1_HDCP ? "with" : "without",
> + hdmi->phy->name);
>
> initialize_hdmi_ih_mutes(hdmi);
>
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 3bb22a849830..b080a171a23f 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -27,6 +27,16 @@ enum dw_hdmi_devtype {
> RK3288_HDMI,
> };
>
> +enum dw_hdmi_phy_type {
> + DW_HDMI_PHY_DWC_HDMI_TX_PHY = 0x00,
> + DW_HDMI_PHY_DWC_MHL_PHY_HEAC = 0xb2,
> + DW_HDMI_PHY_DWC_MHL_PHY = 0xc2,
> + DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC = 0xe2,
> + DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY = 0xf2,
> + DW_HDMI_PHY_DWC_HDMI20_TX_PHY = 0xf3,
> + DW_HDMI_PHY_VENDOR_PHY = 0xfe,
> +};
> +
> struct dw_hdmi_mpll_config {
> unsigned long mpixelclock;
> struct {
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
