Re: [PATCH v2 17/29] drm: bridge: dw-hdmi: Refactor PHY power handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 20, 2016 at 03:33:48AM +0200, Laurent Pinchart wrote:
> Instead of spreading version-dependent PHY power handling code around,
> group it in two functions to power the PHY on and off and use them
> through the driver.
> 
> Powering off the PHY at the beginning of the setup phase is currently
> split in two locations for first and second generation PHYs, group all
> the operations in the dw_hdmi_phy_init() function.

This changes the behaviour of the driver.

> +static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
> +{
> +	if (hdmi->phy->gen == 1) {
> +		dw_hdmi_phy_enable_tmds(hdmi, 0);
> +		dw_hdmi_phy_enable_powerdown(hdmi, true);
> +	} else {
> +		dw_hdmi_phy_gen2_txpwron(hdmi, 0);
> +		dw_hdmi_phy_gen2_pddq(hdmi, 1);
> +	}
> +}

> @@ -1290,9 +1302,7 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi)
>  	if (!hdmi->phy_enabled)
>  		return;
>  
> -	dw_hdmi_phy_enable_tmds(hdmi, 0);
> -	dw_hdmi_phy_enable_powerdown(hdmi, true);
> -
> +	dw_hdmi_phy_power_off(hdmi);

This makes dw_hdmi_phy_disable() power down a gen2 phy.

The iMX6 has a DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY phy, which you list as a
gen2 phy.  I've been carrying this change for a while, which I've had
to revert (and finally expunge), as it causes problems on iMX6:

@@ -1112,6 +1112,14 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi)
        if (!hdmi->phy_enabled)
                return;

+       /* Actually set the phy into low power mode */
+       dw_hdmi_phy_gen2_txpwron(hdmi, 0);
+
+       /* FIXME: We should wait for TX_READY to be deasserted */
+
+       dw_hdmi_phy_gen2_pddq(hdmi, 1);
+
+       /* This appears to have no effect on iMX6 */
        dw_hdmi_phy_enable_tmds(hdmi, 0);
        dw_hdmi_phy_enable_powerdown(hdmi, true);

So, I think your change here will cause problems for iMX6.

>From what I remember, it seems that iMX6 has issues with RXSENSE/HPD
bouncing when the PHY is powered down.  I can't promise when I'll be
able to check for that again.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux