Even on fast systems a 2 microsecond delay is most likely more efficient as a busy-wait loop. The overhead of a hrtimer does not seem warranted - change this to a udelay(2). Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxx> --- Problem found by coccinelle: Patch was compile tested with: x86_64_defconfig (implies CONFIG_DRM_I915) Patch is against 4.9.0 (localversion-next is next-20161214) drivers/gpu/drm/i915/intel_dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 5b72c50..19fe86b 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -379,7 +379,7 @@ static void bxt_dsi_device_ready(struct intel_encoder *encoder) val &= ~ULPS_STATE_MASK; val |= (ULPS_STATE_ENTER | DEVICE_READY); I915_WRITE(MIPI_DEVICE_READY(port), val); - usleep_range(2, 3); + udelay(2); /* 3. Exit ULPS */ val = I915_READ(MIPI_DEVICE_READY(port)); -- 2.1.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
