On Mon, Dec 12, 2016 at 12:40 AM, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote: > Hi, > > On 11/29/2016 10:34 AM, John Stultz wrote: >> >> Wanted to send out v2 of this patch set improving the EDID >> probing on the adv7511 used on HiKey. >> >> The first three patches are fixups that are hopefully straight >> forward, integrating feedback I got from Laurant. >> >> One of the previous patches that Laurant had concerns about, I >> broke into two patches, which are the last two in this series. >> The core issue seems to be something going wrong with the regmap >> cache state for the ADV7511_REG_EDID_I2C_ADDR (0x43) register >> which results in i2c_transfer errors if we don't do the >> regcache_sync/_mark_dirty() calls. I suspect there might be a >> better solution there, so suggestions will be very welcome. >> >> Thoughts and feedback would be appreciated! > > > I tested this for ADV7533 on DB410c and it works well. We can > pull this if it works fine for ADV7511 too. Laurent, could we > get an Ack for the series from you? I'll be re-sending the series (v3) later today to include fixups suggested by Laurent and others. thanks -john _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
