2016-12-06 16:03 GMT+01:00 Sekhar Nori <nsekhar@xxxxxx>: > On Tuesday 06 December 2016 06:32 PM, Bartosz Golaszewski wrote: >> 2016-12-05 13:49 GMT+01:00 Tomi Valkeinen <tomi.valkeinen@xxxxxx>: >>> On 29/11/16 13:57, Bartosz Golaszewski wrote: >>>> Add the dumb-vga-dac node to the board DT together with corresponding >>>> ports and vga connector. This allows to retrieve the edid info from >>>> the display automatically. >>>> >>> >>> It's a bit difficult to follow this as there's been so many patches >>> going around. But I take the above is the LCDC node in the base da850 >>> dtsi file? In that case, what is the display_in supposed to present? >>> It's the first node in the "display chain", so it has no input. >>> >>> Also, don't touch da850.dtsi here, just add the "ports" node in the >>> da850-lcdk.dts file. >>> >>> If the da850.dtsi has not been merged yet, I'd change the name of the >>> lcdc node to something else than "display". It's rather vague. If it's >>> named "lcdc", reading da850-lcdk.dts becomes much easier, as you'll >>> refer to "lcdc". >>> >> >> The node is already in Sekhar's branch. > > The node name should be 'display' as thats the ePAPR 1.1 generic name > recommendation. The label is also set to 'display' though and that can > be changed to lcdc. > > A pre-patch to fix that before we modify the node further is welcome. > > Thanks, > Sekhar I'll include this in v5 together with the change requested by Laurent. Thanks, Bartosz _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
