This patch series is a final revision of previous patch series for handling link training failure. This has been polished in terms of the kernel documentation based on review feedback. One more patch is added to move sink's max link rate and lane count to intel_dp and compute it at hotplug and only if link training fails else keept it constant. This greatly simplifies the link train fallback logic by changing the max link rate/lane count to the fallback values instead of creating separate fallback values for link rate/lane count. In general the idea is to if link training fails during or after atomic modeset, then the driver sets the link-status property to BAD and sends a HOTPLUG uevent to notify userspace that link status is BAD. The userspace can be modified to be "link-status" property aware and on detecting link-status as BAD, it should revalidate the modes and redo a modeset which in turn will retrain the link at lower fallback values. This has been validated and is proved to pass DP compliance uisng DPR-120. Manasi Navare (4): drm: Add a new connector atomic property for link status drm/i915: Compute sink's max lane count/link BW at Hotplug drm/i915: Find fallback link rate/lane count drm/i915: Implement Link Rate fallback on Link training failure drivers/gpu/drm/drm_atomic.c | 10 ++++ drivers/gpu/drm/drm_atomic_helper.c | 15 ++++++ drivers/gpu/drm/drm_connector.c | 53 ++++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 77 ++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_dp_link_training.c | 22 +++++++- drivers/gpu/drm/i915/intel_drv.h | 9 ++++ include/drm/drm_connector.h | 19 +++++++ include/drm/drm_mode_config.h | 5 ++ include/uapi/drm/drm_mode.h | 4 ++ 9 files changed, 210 insertions(+), 4 deletions(-) -- 1.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
