Re: [PATCH] drm/etnaviv: move linear window on MC1.0 parts if necessary

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/02/2016 12:29 PM, Lucas Stach wrote:
> On i.MX6SX the physical memory is placed above the 2GB mark, so the GPU
> linear window has to be moved for the GPU to work at all. This doesn't
> mix with the FAST_CLEAR feature, as the TS unit doesn't take the linear
> window offset into account and will corrupt memory when used with a
> non-zero offset.
> 
> Move the linear window if it's necessary for the GPU to work, but avoid
> announcing FAST_CLEAR support to userspace in this case.
> 
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>

On MX6SX:
Tested-by: Marek Vasut <marex@xxxxxxx>

> ---
>  drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> index b1254f885fed..4b697ad8bd64 100644
> --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> @@ -639,6 +639,10 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
>  			gpu->memory_base = PHYS_OFFSET;
>  		else
>  			gpu->memory_base = dma_mask - SZ_2G + 1;
> +	} else if (PHYS_OFFSET >= SZ_2G) {
> +		dev_info(gpu->dev, "Need to move linear window on MC1.0, disabling TS\n");
> +		gpu->memory_base = PHYS_OFFSET;
> +		gpu->identity.features &= ~chipFeatures_FAST_CLEAR;
>  	}
>  
>  	ret = etnaviv_hw_reset(gpu);
> 


-- 
Best regards,
Marek Vasut
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux