Re: [PATCH v2 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/30/2016 05:02 PM, Laurent Pinchart wrote:
> Hi Neil,
> 
> Thank you for the patch.
> 
> On Wednesday 30 Nov 2016 16:43:43 Neil Armstrong wrote:
>> Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
>> boards.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi             | 19 ++++++++++++++++
>>  .../arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 15 +++++++++++++++
>>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi      | 15 +++++++++++++++
>>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi           |  4 ++++
>>  arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 15 +++++++++++++++
>>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi            |  4 ++++
>>  arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts   | 15 +++++++++++++++
>>  arch/arm64/boot/dts/amlogic/meson-gxm.dtsi            |  4 ++++
>>  8 files changed, 91 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0..a27f881 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -356,5 +356,24 @@
>>  				status = "disabled";
>>  			};
>>  		};
>> +
>> +		vpu: vpu@d0100000 {
>> +			compatible = "amlogic,meson-gx-vpu";
>> +			reg = <0x0 0xd0100000 0x0 0x100000>,
>> +			      <0x0 0xc883c000 0x0 0x1000>,
>> +			      <0x0 0xc8838000 0x0 0x1000>;
>> +			reg-names = "vpu", "hhi", "dmc";
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			/* CVBS VDAC output port */
>> +			port@0 {
>> +				reg = <0>;
>> +
>> +				cvbs_vdac_out: endpoint {
>> +				};
> 
> Endpoints require a remote-endpoint property. You should move the endpoint to 
> board DT files.

OK, I was wondering, it looked dirty to me.

> 
>> +			};
>> +		};
>>  	};
>>  };
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
>> b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index
>> 9696820..390f7db 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
>> @@ -142,6 +142,17 @@
>>  		clocks = <&wifi32k>;
>>  		clock-names = "ext_clock";
>>  	};
>> +
>> +	cvbs-connector {
>> +		compatible = "composite-video-connector";
>> +		label = "cvbs";
> 
> Unless the board has a label for the connector (either on the board, on the 
> casing or in the user manual) I'd leave this out. Same comment for the other 
> boards.

OK,

Thanks,
Neil

> 
> Apart from that,
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
>> +
>> +		port {
>> +			cvbs_connector_in: endpoint {
>> +				remote-endpoint = <&cvbs_vdac_out>;
>> +			};
>> +		};
>> +	};
>>  };
>>
>>  &uart_AO {
>> @@ -229,3 +240,7 @@
>>  	clocks = <&clkc CLKID_FCLK_DIV4>;
>>  	clock-names = "clkin0";
>>  };
>> +
>> +&cvbs_vdac_out {
>> +	remote-endpoint = <&cvbs_connector_in>;
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 203be28..44bdebf
>> 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
>> @@ -125,6 +125,17 @@
>>  		clocks = <&wifi32k>;
>>  		clock-names = "ext_clock";
>>  	};
>> +
>> +	cvbs-connector {
>> +		compatible = "composite-video-connector";
>> +		label = "cvbs";
>> +
>> +		port {
>> +			cvbs_connector_in: endpoint {
>> +				remote-endpoint = <&cvbs_vdac_out>;
>> +			};
>> +		};
>> +	};
>>  };
>>
>>  /* This UART is brought out to the DB9 connector */
>> @@ -234,3 +245,7 @@
>>  	clocks = <&clkc CLKID_FCLK_DIV4>;
>>  	clock-names = "clkin0";
>>  };
>> +
>> +&cvbs_vdac_out {
>> +	remote-endpoint = <&cvbs_connector_in>;
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ac5ad3b..5353a20 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> @@ -506,3 +506,7 @@
>>  		 <&clkc CLKID_FCLK_DIV2>;
>>  	clock-names = "core", "clkin0", "clkin1";
>>  };
>> +
>> +&vpu {
>> +	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
>> b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index
>> e99101a..7bd0538 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
>> @@ -117,6 +117,17 @@
>>  		clocks = <&wifi32k>;
>>  		clock-names = "ext_clock";
>>  	};
>> +
>> +	cvbs-connector {
>> +		compatible = "composite-video-connector";
>> +		label = "cvbs";
>> +
>> +		port {
>> +			cvbs_connector_in: endpoint {
>> +				remote-endpoint = <&cvbs_vdac_out>;
>> +			};
>> +		};
>> +	};
>>  };
>>
>>  &uart_AO {
>> @@ -203,3 +214,7 @@
>>  	clocks = <&clkc CLKID_FCLK_DIV4>;
>>  	clock-names = "clkin0";
>>  };
>> +
>> +&cvbs_vdac_out {
>> +	remote-endpoint = <&cvbs_connector_in>;
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9f89b99..5c7a8fa 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> @@ -299,3 +299,7 @@
>>  		 <&clkc CLKID_FCLK_DIV2>;
>>  	clock-names = "core", "clkin0", "clkin1";
>>  };
>> +
>> +&vpu {
>> +	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
>> b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index
>> d320727..5b99749 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
>> @@ -90,6 +90,17 @@
>>  		compatible = "mmc-pwrseq-emmc";
>>  		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
>>  	};
>> +
>> +	cvbs-connector {
>> +		compatible = "composite-video-connector";
>> +		label = "cvbs";
>> +
>> +		port {
>> +			cvbs_connector_in: endpoint {
>> +				remote-endpoint = <&cvbs_vdac_out>;
>> +			};
>> +		};
>> +	};
>>  };
>>
>>  /* This UART is brought out to the DB9 connector */
>> @@ -167,3 +178,7 @@
>>  		max-speed = <1000>;
>>  	};
>>  };
>> +
>> +&cvbs_vdac_out {
>> +	remote-endpoint = <&cvbs_connector_in>;
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bb..eb2f0c3 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
>> @@ -112,3 +112,7 @@
>>  		};
>>  	};
>>  };
>> +
>> +&vpu {
>> +	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
>> +};
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux