Hi Jean-François,
Dne petek, 25. november 2016 11.22.20 UTC+1 je oseba Jean-François Moine napisala:
My U-Boot driver never exhibited a problem with reading EDID on OPi2. However,
I'm reusing code from Rockchip HDMI U-Boot driver for this (with some Allwinner
adjustments).
Best regards,
Jernej Škrabec
Dne petek, 25. november 2016 11.22.20 UTC+1 je oseba Jean-François Moine napisala:
On Fri, 25 Nov 2016 17:41:51 +0800
Icenowy Zheng <ice...@xxxxxxxx> wrote:
> After removing CLK_PLL_DE's assigned-clock, the kernel passes compilation.
The 'pll-de' and 'de' must have a fixed rate. Otherwise, if you do not
use the legacy u-boot, I don't know which can be the rate of the DE.
> However, it cannot recognize any HDMI screen...
>
> (My board is Orange Pi One, and I manually added status="okay"; to &lcd0, &de, &hdmi)
>
> [ 16.507802] sun8i-de2 1000000.de-controller: bound 1c0c000.lcd-controller (ops de2_lcd_ops [sun8i_de2_drm])
> [ 16.675948] sun8i-de2 1000000.de-controller: bound 1ee0000.hdmi (ops de2_hdmi_fini [sun8i_de2_hdmi])
> [ 16.685120] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 16.695876] [drm] No driver support for vblank timestamp query.
> [ 16.701862] sun8i-de2 1000000.de-controller: No connectors reported connected with modes
> [ 16.713061] [drm] Cannot find any crtc or sizes - going 1024x768
> [ 16.734214] Console: switching to colour frame buffer device 128x48
> [ 16.751022] sun8i-de2 1000000.de-controller: fb0: frame buffer device
I put a 'pr_warn' message is case the EDID cannot be read.
Have you this message?
Anyway, there is a problem with the EDID:
- my Orange Pi 2 (H3) randomly fails to read it. But this succeeds after
rebooting once or twice.
My U-Boot driver never exhibited a problem with reading EDID on OPi2. However,
I'm reusing code from Rockchip HDMI U-Boot driver for this (with some Allwinner
adjustments).
- my Banana Pi M2+ (H3) reads it correctly each time.
- my Banana Pi M3 (A83T) can never read it.
BTW, on first tries, I was forcing a CEA mode thru the kernel command
line. This was working with the OPi2 and BPiM3, but there was no sound.
In the last version, I use a EDID in edid_firmware for having sound
with the BPiM3. This works fine.
But, forcing a CEA mode is no more possible, so, when the OPi2 cannot
read the EDID, the system switches to a VGA mode (default 1024x768)
which is not supported. It seems that this is your case.
So, in brief, if your board cannot read the EDID, put a EDID somewhere
and its path in /sys/module/drm_kms_helper/parameters/edid_firmware.
There will be no console, but X11 will work correctly.
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef |http://moinejf.free.fr/
Best regards,
Jernej Škrabec
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
