On Tue, Nov 22, 2016 at 04:49:52PM +0200, Jyri Sarha wrote: > Add very basic ti-tfp410 DVI transmitter driver. The only feature > separating this from a completely dummy bridge is the EDID read > support trough DDC I2C. Even that functionality should be in a > separate generic connector driver. However, because of missing DRM > infrastructure support the connector is implemented within the bridge > driver. Some tfp410 HW specific features may be added later if needed, > because there is a set of registers behind i2c if it is connected. > > This implementation is tested against my new tilcdc bridge support > and it works with BeagleBone DVI-D Cape Rev A3. A DT binding document > is also updated. > > Signed-off-by: Jyri Sarha <jsarha@xxxxxx> > --- > .../bindings/display/bridge/ti,tfp410.txt | 9 +- Acked-by: Rob Herring <robh@xxxxxxxxxx> > drivers/gpu/drm/bridge/Kconfig | 7 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/ti-tfp410.c | 311 +++++++++++++++++++++ > 4 files changed, 326 insertions(+), 2 deletions(-) > create mode 100644 drivers/gpu/drm/bridge/ti-tfp410.c _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
