On Thu, Nov 17, 2016 at 10:36:12PM -0800, Manasi Navare wrote:
> On Thu, Nov 17, 2016 at 09:56:48AM +0100, Daniel Vetter wrote:
> > There's a really big pile of additional connector properties, a lot of
> > them standardized. But they're all for specific outputs (panels, TV,
> > scaling, ...) so I left them out for now since this is enough for a
> > start.
> >
> > I typed this to give Manasi a place to add her new link status
> > property documentation.
> >
> > v2: forgot to git add all the bits (Manasi).
> >
> > v3: Be more epxlicit about integrated tiled panels (Archit)
> >
>
> Reviewed-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Thanks for the review, patch applied to drm-misc.
-Daniel
> > Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
> > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> > ---
> > Documentation/gpu/drm-kms.rst | 6 ++++++
> > drivers/gpu/drm/drm_connector.c | 44 +++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 50 insertions(+)
> >
> > diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
> > index 568f3c2b6e46..f19757b1736a 100644
> > --- a/Documentation/gpu/drm-kms.rst
> > +++ b/Documentation/gpu/drm-kms.rst
> > @@ -260,6 +260,12 @@ Property Types and Blob Property Support
> > .. kernel-doc:: drivers/gpu/drm/drm_property.c
> > :export:
> >
> > +Standard Connector Properties
> > +-----------------------------
> > +
> > +.. kernel-doc:: drivers/gpu/drm/drm_connector.c
> > + :doc: standard connector properties
> > +
> > Plane Composition Properties
> > ----------------------------
> >
> > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> > index b5c6a8ee831e..5a4526289392 100644
> > --- a/drivers/gpu/drm/drm_connector.c
> > +++ b/drivers/gpu/drm/drm_connector.c
> > @@ -588,6 +588,50 @@ static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
> > DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
> > drm_tv_subconnector_enum_list)
> >
> > +/**
> > + * DOC: standard connector properties
> > + *
> > + * DRM connectors have a few standardized properties:
> > + *
> > + * EDID:
> > + * Blob property which contains the current EDID read from the sink. This
> > + * is useful to parse sink identification information like vendor, model
> > + * and serial. Drivers should update this property by calling
> > + * drm_mode_connector_update_edid_property(), usually after having parsed
> > + * the EDID using drm_add_edid_modes(). Userspace cannot change this
> > + * property.
> > + * DPMS:
> > + * Legacy property for setting the power state of the connector. For atomic
> > + * drivers this is only provided for backwards compatibility with existing
> > + * drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
> > + * connector is linked to. Drivers should never set this property directly,
> > + * it is handled by the DRM core by calling the ->dpms() callback in
> > + * &drm_connector_funcs. Atomic drivers should implement this hook using
> > + * drm_atomic_helper_connector_dpms(). This is the only property standard
> > + * connector property that userspace can change.
> > + * PATH:
> > + * Connector path property to identify how this sink is physically
> > + * connected. Used by DP MST. This should be set by calling
> > + * drm_mode_connector_set_path_property(), in the case of DP MST with the
> > + * path property the MST manager created. Userspace cannot change this
> > + * property.
> > + * TILE:
> > + * Connector tile group property to indicate how a set of DRM connector
> > + * compose together into one logical screen. This is used by both high-res
> > + * external screens (often only using a single cable, but exposing multiple
> > + * DP MST sinks), or high-res integrated panels (like dual-link DSI) which
> > + * are not gen-locked. Note that for tiled panels which are genlocked, like
> > + * dual-link LVDS or dual-link DSI, the driver should try to not expose the
> > + * tiling and virtualize both &drm_crtc and &drm_plane if needed. Drivers
> > + * should update this value using drm_mode_connector_set_tile_property().
> > + * Userspace cannot change this property.
> > + *
> > + * Connectors also have one standardized atomic property:
> > + *
> > + * CRTC_ID:
> > + * Mode object ID of the &drm_crtc this connector should be connected to.
> > + */
> > +
> > int drm_connector_create_standard_properties(struct drm_device *dev)
> > {
> > struct drm_property *prop;
> > --
> > 2.10.2
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
