Hi, 2016-11-14 16:22 GMT+01:00 Hans Verkuil <hverkuil@xxxxxxxxx>: > From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> > > We don't need the CEC engine register definitions, so let's remove them. > > Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> > --- > drivers/gpu/drm/bridge/dw-hdmi.h | 45 ---------------------------------------- > 1 file changed, 45 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/dw-hdmi.h b/drivers/gpu/drm/bridge/dw-hdmi.h > index fc9a560..26d6845 100644 > --- a/drivers/gpu/drm/bridge/dw-hdmi.h > +++ b/drivers/gpu/drm/bridge/dw-hdmi.h > @@ -478,51 +478,6 @@ > #define HDMI_A_PRESETUP 0x501A > #define HDMI_A_SRM_BASE 0x5020 > > -/* CEC Engine Registers */ > -#define HDMI_CEC_CTRL 0x7D00 > -#define HDMI_CEC_STAT 0x7D01 > -#define HDMI_CEC_MASK 0x7D02 I don't know if this is relevant for a submission, but the build stops working here because of a missing definition HDMI_CEC_MASK Perhaps this should be inverted with 3/5 to make bissecting easier? I was trying to bissect a kernel panic, and I had to fix this by hand > -#define HDMI_CEC_POLARITY 0x7D03 > -#define HDMI_CEC_INT 0x7D04 > -#define HDMI_CEC_ADDR_L 0x7D05 > -#define HDMI_CEC_ADDR_H 0x7D06 > -#define HDMI_CEC_TX_CNT 0x7D07 > -#define HDMI_CEC_RX_CNT 0x7D08 > -#define HDMI_CEC_TX_DATA0 0x7D10 > -#define HDMI_CEC_TX_DATA1 0x7D11 > -#define HDMI_CEC_TX_DATA2 0x7D12 > -#define HDMI_CEC_TX_DATA3 0x7D13 > -#define HDMI_CEC_TX_DATA4 0x7D14 > -#define HDMI_CEC_TX_DATA5 0x7D15 > -#define HDMI_CEC_TX_DATA6 0x7D16 > -#define HDMI_CEC_TX_DATA7 0x7D17 > -#define HDMI_CEC_TX_DATA8 0x7D18 > -#define HDMI_CEC_TX_DATA9 0x7D19 > -#define HDMI_CEC_TX_DATA10 0x7D1a > -#define HDMI_CEC_TX_DATA11 0x7D1b > -#define HDMI_CEC_TX_DATA12 0x7D1c > -#define HDMI_CEC_TX_DATA13 0x7D1d > -#define HDMI_CEC_TX_DATA14 0x7D1e > -#define HDMI_CEC_TX_DATA15 0x7D1f > -#define HDMI_CEC_RX_DATA0 0x7D20 > -#define HDMI_CEC_RX_DATA1 0x7D21 > -#define HDMI_CEC_RX_DATA2 0x7D22 > -#define HDMI_CEC_RX_DATA3 0x7D23 > -#define HDMI_CEC_RX_DATA4 0x7D24 > -#define HDMI_CEC_RX_DATA5 0x7D25 > -#define HDMI_CEC_RX_DATA6 0x7D26 > -#define HDMI_CEC_RX_DATA7 0x7D27 > -#define HDMI_CEC_RX_DATA8 0x7D28 > -#define HDMI_CEC_RX_DATA9 0x7D29 > -#define HDMI_CEC_RX_DATA10 0x7D2a > -#define HDMI_CEC_RX_DATA11 0x7D2b > -#define HDMI_CEC_RX_DATA12 0x7D2c > -#define HDMI_CEC_RX_DATA13 0x7D2d > -#define HDMI_CEC_RX_DATA14 0x7D2e > -#define HDMI_CEC_RX_DATA15 0x7D2f > -#define HDMI_CEC_LOCK 0x7D30 > -#define HDMI_CEC_WKUPCTRL 0x7D31 > - > /* I2C Master Registers (E-DDC) */ > #define HDMI_I2CM_SLAVE 0x7E00 > #define HDMI_I2CM_ADDRESS 0x7E01 > -- > 2.8.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
