2016-11-14 17:54 GMT+01:00 Jyri Sarha <jsarha@xxxxxx>:
> Adds drm bride support for attaching drm bridge drivers to tilcdc. The
> decision whether a video port leads to an external encoder or bridge
> is made simply based on remote device's compatible string. The code
> has been tested with BeagleBone-Black with and without BeagleBone
> DVI-D Cape Rev A3 using ti-tfp410 driver.
>
> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
> ---
Hi Jyri,
thanks a lot for doing this.
One issue I see with this patch is that tilcdc doesn't seem to support
deferred probe correctly (if modules are built-in). The following
happens on my setup:
The dump-vga-dac module is loaded first, but the i2c0 is not ready yet
- probe returns EPROBE_DEFER and it's propagated to tilcdc probe.
[drm] Initialized
dumb-vga-dac vga_bridge: Couldn't retrieve i2c bus
Then the i2c bus is initialized and dump-vga-dac probe succeeds, but
the second probe of tilcdc gives me:
[drm:drm_debugfs_init] *ERROR* Cannot create /sys/kernel/debug/dri/64
[drm:drm_minor_register] *ERROR* DRM: Failed to initialize
/sys/kernel/debug/dri.
tilcdc: probe of da8xx_lcdc.0 failed with error -1
I was able to work around this issue by loading modules in correct order.
I then tried testing the patch with a da850-lcdk, but I don't get
anything on the display (no signal), even though the LCDC seems to
work fine (modetest and dmesg messages work just like when using the
tilcdc panel). Also: I see the EDID info is correctly retrieved from
the display.
Could you take a look at my DT[1] and see if you find it correct?
Best regards,
Bartosz Golaszewski
[1] http://pastebin.com/dfUX7PyL
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
