None of the other functions that set the connector property hold the
mode config locks while setting the connector property, I am following
the same convention.
Also we dont need to grab and release the locks in i915_modeset_work_func
that first validates the modes and then sets this link status property.
Manasi
On Mon, Nov 14, 2016 at 07:13:20PM -0800, Manasi Navare wrote:
> In the usual working scenarios, this property is "Good".
> If something fails during modeset, the DRM driver can
> set the link status to "Bad", prune the mode list based on the
> link rate/lane count fallback values and send hotplug uevent
> so that userspace that is aware of this property can take an
> appropriate action by reprobing connectors and re triggering
> a modeset to improve user experience and avoid black screens.
> In case of userspace that is not aware of this link status
> property, the user experience will be unchanged.
>
> The reason for adding the property is to handle link training failures,
> but it is not limited to DP or link training. For example, if we
> implement asynchronous setcrtc, we can use this to report any failures
> in that.
>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_connector.c | 38 ++++++++++++++++++++++++++++++++++++++
> include/drm/drm_connector.h | 2 ++
> 2 files changed, 40 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index d4e852f..09f4093 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -968,6 +968,44 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
> }
> EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
>
> +/**
> + * drm_mode_connector_set_link_status_property - Set the link status property of
> + * a connector to indicate status of link as a result of link training.
> + * @connector: drm connector
> + * @link_status: new value of link status property (0: Good, 1: Bad)
> + *
> + * In usual working scenario, this link status property will always be set to
> + * "GOOD".
> + * If something fails during or after a mode set, the kernel driver can set this
> + * link status to "BAD", prune the mode list based on new information and send a
> + * hotplug uevent for userspace to have it re-check the valid modes through
> + * Get_connector and try again.
> + *
> + * If userspace is not aware of this property, the user experience is the same
> + * as it currently is. If the userspace is aware of the property, it has a chance
> + * to improve user experience by handling link training failures, avoiding black
> + * screens. The DRM driver can chose to not modify property and keep link status
> + * as "GOOD" always to keep the user experience same as it currently is.
> + *
> + * The reason for adding this property is to handle link training failures, but
> + * it is not limited to DP or link training. For example, if we implement
> + * asynchronous setcrtc, this property can be used to reportany failures in that.
> + *
> + * This function must be called from asynchronous work item.
> + * Returns zero on success and negative errrno on failure.
> + */
> +int drm_mode_connector_set_link_status_property(struct drm_connector *connector,
> + uint64_t link_status)
> +{
> + struct drm_device *dev = connector->dev;
> +
> + connector->link_status = link_status;
> + return drm_object_property_set_value(&connector->base,
> + dev->mode_config.link_status_property,
> + link_status);
> +}
> +EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
> +
> int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
> struct drm_property *property,
> uint64_t value)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index ad5c8b0..ac76469 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -778,6 +778,8 @@ int drm_mode_connector_set_path_property(struct drm_connector *connector,
> int drm_mode_connector_set_tile_property(struct drm_connector *connector);
> int drm_mode_connector_update_edid_property(struct drm_connector *connector,
> const struct edid *edid);
> +int drm_mode_connector_set_link_status_property(struct drm_connector *connector,
> + uint64_t link_status);
>
> /**
> * drm_for_each_connector - iterate over all connectors
> --
> 1.9.1
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
