Re: [PATCH v6 1/9] drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 28, 2016 at 3:27 AM, Rongrong Zou <zourongrong@xxxxxxxxx> wrote:
> Add DRM master driver for Hisilicon Hibmc SoC which used for
> Out-of-band management. Blow is the general hardware connection,
> both the Hibmc and the host CPU are on the same mother board.
>
> +----------+       +----------+
> |          | PCIe  |  Hibmc   |
> |host CPU( |<----->| display  |
> |arm64,x86)|       |subsystem |
> +----------+       +----------+
>
> Signed-off-by: Rongrong Zou <zourongrong@xxxxxxxxx>
> ---
>  drivers/gpu/drm/hisilicon/Kconfig                 |   1 +
>  drivers/gpu/drm/hisilicon/Makefile                |   1 +
>  drivers/gpu/drm/hisilicon/hibmc/Kconfig           |   7 +
>  drivers/gpu/drm/hisilicon/hibmc/Makefile          |   5 +
>  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c   | 269 ++++++++++++++++++++++
>  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h   |  35 +++
>  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c |  85 +++++++
>  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h |  28 +++
>  drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h  | 212 +++++++++++++++++
>  9 files changed, 643 insertions(+)
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/Kconfig
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/Makefile
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
>
> diff --git a/drivers/gpu/drm/hisilicon/Kconfig b/drivers/gpu/drm/hisilicon/Kconfig
> index 558c61b..2fd2724 100644
> --- a/drivers/gpu/drm/hisilicon/Kconfig
> +++ b/drivers/gpu/drm/hisilicon/Kconfig
> @@ -2,4 +2,5 @@
>  # hisilicon drm device configuration.
>  # Please keep this list sorted alphabetically
>
> +source "drivers/gpu/drm/hisilicon/hibmc/Kconfig"
>  source "drivers/gpu/drm/hisilicon/kirin/Kconfig"
> diff --git a/drivers/gpu/drm/hisilicon/Makefile b/drivers/gpu/drm/hisilicon/Makefile
> index e3f6d49..c8155bf 100644
> --- a/drivers/gpu/drm/hisilicon/Makefile
> +++ b/drivers/gpu/drm/hisilicon/Makefile
> @@ -2,4 +2,5 @@
>  # Makefile for hisilicon drm drivers.
>  # Please keep this list sorted alphabetically
>
> +obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc/
>  obj-$(CONFIG_DRM_HISI_KIRIN) += kirin/
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Kconfig b/drivers/gpu/drm/hisilicon/hibmc/Kconfig
> new file mode 100644
> index 0000000..a9af90d
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/Kconfig
> @@ -0,0 +1,7 @@
> +config DRM_HISI_HIBMC
> +       tristate "DRM Support for Hisilicon Hibmc"
> +       depends on DRM && PCI
> +
> +       help
> +         Choose this option if you have a Hisilicon Hibmc soc chipset.
> +         If M is selected the module will be called hibmc-drm.
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
> new file mode 100644
> index 0000000..97cf4a0
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
> @@ -0,0 +1,5 @@
> +ccflags-y := -Iinclude/drm
> +hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_power.o
> +
> +obj-$(CONFIG_DRM_HISI_HIBMC)   +=hibmc-drm.o

nit: Improper spacing here

> +#obj-y += hibmc-drm.o
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
> new file mode 100644
> index 0000000..4669d42
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
> @@ -0,0 +1,269 @@
> +/* Hisilicon Hibmc SoC drm driver
> + *
> + * Based on the bochs drm driver.
> + *
> + * Copyright (c) 2016 Huawei Limited.
> + *
> + * Author:
> + *     Rongrong Zou <zourongrong@xxxxxxxxxx>
> + *     Rongrong Zou <zourongrong@xxxxxxxxx>
> + *     Jianhua Li <lijianhua@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/console.h>
> +
> +#include "hibmc_drm_drv.h"
> +#include "hibmc_drm_regs.h"
> +#include "hibmc_drm_power.h"

nit: Alphabetize headers

> +
> +static const struct file_operations hibmc_fops = {
> +       .owner          = THIS_MODULE,
> +       .open           = drm_open,
> +       .release        = drm_release,
> +       .unlocked_ioctl = drm_ioctl,
> +#ifdef CONFIG_COMPAT

drm_compat_ioctl is now initialized to NULL, so you can remove the #ifdef

> +       .compat_ioctl   = drm_compat_ioctl,
> +#endif
> +       .poll           = drm_poll,
> +       .read           = drm_read,
> +       .llseek         = no_llseek,
> +};
> +
> +static int hibmc_enable_vblank(struct drm_device *dev, unsigned int pipe)
> +{
> +       return 0;
> +}
> +
> +static void hibmc_disable_vblank(struct drm_device *dev, unsigned int pipe)
> +{
> +}
> +
> +static struct drm_driver hibmc_driver = {
> +       .fops                   = &hibmc_fops,
> +       .name                   = "hibmc",
> +       .date                   = "20160828",
> +       .desc                   = "hibmc drm driver",
> +       .major                  = 1,
> +       .minor                  = 0,
> +       .get_vblank_counter     = drm_vblank_no_hw_counter,
> +       .enable_vblank          = hibmc_enable_vblank,
> +       .disable_vblank         = hibmc_disable_vblank,
> +};
> +
> +static int hibmc_pm_suspend(struct device *dev)
> +{
> +       return 0;
> +}
> +
> +static int hibmc_pm_resume(struct device *dev)
> +{
> +       return 0;
> +}
> +
> +static const struct dev_pm_ops hibmc_pm_ops = {
> +       SET_SYSTEM_SLEEP_PM_OPS(hibmc_pm_suspend,
> +                               hibmc_pm_resume)
> +};
> +
> +static int hibmc_hw_config(struct hibmc_drm_device *hidev)
> +{
> +       unsigned int reg;
> +
> +       /* On hardware reset, power mode 0 is default. */
> +       hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_MODE0);
> +
> +       /* Enable display power gate & LOCALMEM power gate*/
> +       reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
> +       reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
> +       reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
> +       reg |= HIBMC_CURR_GATE_DISPLAY(ON);
> +       reg |= HIBMC_CURR_GATE_LOCALMEM(ON);
> +
> +       hibmc_set_current_gate(hidev, reg);
> +
> +       /* Reset the memory controller. If the memory controller
> +        * is not reset in chip,the system might hang when sw accesses
> +        * the memory.The memory should be resetted after
> +        * changing the MXCLK.
> +        */
> +       reg = readl(hidev->mmio + HIBMC_MISC_CTRL);
> +       reg &= ~HIBMC_MSCCTL_LOCALMEM_RESET_MASK;
> +       reg |= HIBMC_MSCCTL_LOCALMEM_RESET(RESET);
> +       writel(reg, hidev->mmio + HIBMC_MISC_CTRL);
> +
> +       reg &= ~HIBMC_MSCCTL_LOCALMEM_RESET_MASK;
> +       reg |= HIBMC_MSCCTL_LOCALMEM_RESET(NORMAL);
> +
> +       writel(reg, hidev->mmio + HIBMC_MISC_CTRL);
> +
> +       /* We can add more initialization as needed. */
> +
> +       return 0;

Consider using void return type here to simplify error checking in the
caller, especially since it looks like you aren't checking the return
code, anyways :)

> +}
> +
> +static int hibmc_hw_map(struct hibmc_drm_device *hidev)
> +{
> +       struct drm_device *dev = hidev->dev;
> +       struct pci_dev *pdev = dev->pdev;
> +       resource_size_t addr, size, ioaddr, iosize;
> +
> +       ioaddr = pci_resource_start(pdev, 1);
> +       iosize = MB(2);
> +
> +       hidev->mmio = ioremap_nocache(ioaddr, iosize);

Use devm_ioremap_nocache to avoid managing the resource directly

> +

nit: extra space

> +       if (!hidev->mmio) {
> +               DRM_ERROR("Cannot map mmio region\n");
> +               return -ENOMEM;
> +       }
> +
> +       addr = pci_resource_start(pdev, 0);
> +       size = MB(32);

Pull size and iosize out into #defines with descriptive names

> +
> +       hidev->fb_map = ioremap(addr, size);

Use devm_ioremap to avoid managing the resource directly.

> +       if (!hidev->fb_map) {
> +               DRM_ERROR("Cannot map framebuffer\n");
> +               return -ENOMEM;
> +       }
> +       hidev->fb_base = addr;
> +       hidev->fb_size = size;
> +
> +       return 0;
> +}
> +
> +static void hibmc_hw_fini(struct hibmc_drm_device *hidev)
> +{
> +       if (hidev->mmio)
> +               iounmap(hidev->mmio);
> +       if (hidev->fb_map)
> +               iounmap(hidev->fb_map);
> +}

You don't need this function if you use the devm variants above

> +
> +static int hibmc_hw_init(struct hibmc_drm_device *hidev)
> +{
> +       int ret;
> +
> +       ret = hibmc_hw_map(hidev);
> +       if (ret)
> +               return ret;
> +
> +       hibmc_hw_config(hidev);
> +
> +       return 0;
> +}
> +
> +static int hibmc_unload(struct drm_device *dev)
> +{
> +       struct hibmc_drm_device *hidev = dev->dev_private;
> +
> +       hibmc_hw_fini(hidev);
> +       dev->dev_private = NULL;
> +       return 0;
> +}
> +
> +static int hibmc_load(struct drm_device *dev, unsigned long flags)

flags isn't used anywhere?

> +{
> +       struct hibmc_drm_device *hidev;
> +       int ret;
> +
> +       hidev = devm_kzalloc(dev->dev, sizeof(*hidev), GFP_KERNEL);
> +       if (!hidev)

Print error here?

> +               return -ENOMEM;
> +       dev->dev_private = hidev;
> +       hidev->dev = dev;
> +
> +       ret = hibmc_hw_init(hidev);
> +       if (ret)
> +               goto err;
> +
> +       return 0;
> +
> +err:
> +       hibmc_unload(dev);
> +       DRM_ERROR("failed to initialize drm driver.\n");

Print the return value

> +       return ret;
> +}
> +
> +static int hibmc_pci_probe(struct pci_dev *pdev,
> +                          const struct pci_device_id *ent)
> +{
> +       struct drm_device *dev;
> +       int ret;
> +
> +       dev = drm_dev_alloc(&hibmc_driver, &pdev->dev);
> +       if (!dev)

Print error here

> +               return -ENOMEM;
> +
> +       dev->pdev = pdev;
> +       pci_set_drvdata(pdev, dev);
> +
> +       ret = pci_enable_device(pdev);
> +       if (ret)

and here, and in other failure paths

> +               goto err_free;
> +
> +       ret = hibmc_load(dev, 0);
> +       if (ret)
> +               goto err_disable;
> +
> +       ret = drm_dev_register(dev, 0);
> +       if (ret)
> +               goto err_unload;
> +
> +       return 0;
> +
> +err_unload:
> +       hibmc_unload(dev);
> +err_disable:
> +       pci_disable_device(pdev);
> +err_free:
> +       drm_dev_unref(dev);
> +
> +       return ret;
> +}
> +
> +static void hibmc_pci_remove(struct pci_dev *pdev)
> +{
> +       struct drm_device *dev = pci_get_drvdata(pdev);
> +
> +       drm_dev_unregister(dev);
> +       hibmc_unload(dev);
> +       drm_dev_unref(dev);
> +}
> +
> +static struct pci_device_id hibmc_pci_table[] = {
> +       {0x19e5, 0x1711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> +       {0,}
> +};
> +
> +static struct pci_driver hibmc_pci_driver = {
> +       .name =         "hibmc-drm",
> +       .id_table =     hibmc_pci_table,
> +       .probe =        hibmc_pci_probe,
> +       .remove =       hibmc_pci_remove,
> +       .driver.pm =    &hibmc_pm_ops,
> +};
> +
> +static int __init hibmc_init(void)
> +{
> +       return pci_register_driver(&hibmc_pci_driver);
> +}
> +
> +static void __exit hibmc_exit(void)
> +{
> +       return pci_unregister_driver(&hibmc_pci_driver);
> +}
> +
> +module_init(hibmc_init);
> +module_exit(hibmc_exit);
> +
> +MODULE_DEVICE_TABLE(pci, hibmc_pci_table);
> +MODULE_AUTHOR("RongrongZou <zourongrong@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("DRM Driver for Hisilicon Hibmc");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
> new file mode 100644
> index 0000000..0037341
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
> @@ -0,0 +1,35 @@
> +/* Hisilicon Hibmc SoC drm driver
> + *
> + * Based on the bochs drm driver.
> + *
> + * Copyright (c) 2016 Huawei Limited.
> + *
> + * Author:
> + *     Rongrong Zou <zourongrong@xxxxxxxxxx>
> + *     Rongrong Zou <zourongrong@xxxxxxxxx>
> + *     Jianhua Li <lijianhua@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#ifndef HIBMC_DRM_DRV_H
> +#define HIBMC_DRM_DRV_H
> +
> +#include <drm/drmP.h>
> +
> +struct hibmc_drm_device {

nit: Calling this hibmc_drm_priv would probably make things easier to
read. When I read hibmc_drm_device, it makes me think that it's an
extension of drm_device, which this isn't.


> +       /* hw */
> +       void __iomem   *mmio;
> +       void __iomem   *fb_map;
> +       unsigned long  fb_base;
> +       unsigned long  fb_size;
> +
> +       /* drm */
> +       struct drm_device  *dev;
> +};
> +
> +#endif
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c
> new file mode 100644
> index 0000000..1036542
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c

I don't think you need a new file for these functions. Just stash them
in hibmc_drm_drv.c

> @@ -0,0 +1,85 @@
> +/* Hisilicon Hibmc SoC drm driver
> + *
> + * Based on the bochs drm driver.
> + *
> + * Copyright (c) 2016 Huawei Limited.
> + *
> + * Author:
> + *     Rongrong Zou <zourongrong@xxxxxxxxxx>
> + *     Rongrong Zou <zourongrong@xxxxxxxxx>
> + *     Jianhua Li <lijianhua@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include "hibmc_drm_drv.h"
> +#include "hibmc_drm_regs.h"
> +
> +/*
> + * It can operate in one of three modes: 0, 1 or Sleep.
> + */
> +void hibmc_set_power_mode(struct hibmc_drm_device *hidev,
> +                         unsigned int power_mode)
> +{
> +       unsigned int control_value = 0;
> +       void __iomem   *mmio = hidev->mmio;
> +
> +       if (power_mode > HIBMC_PW_MODE_CTL_MODE_SLEEP)
> +               return;
> +
> +       control_value = readl(mmio + HIBMC_POWER_MODE_CTRL);
> +       control_value &= ~HIBMC_PW_MODE_CTL_MODE_MASK;
> +
> +       control_value |= HIBMC_PW_MODE_CTL_MODE(power_mode) &
> +                        HIBMC_PW_MODE_CTL_MODE_MASK;
> +
> +    /* Set up other fields in Power Control Register */
> +       if (power_mode == HIBMC_PW_MODE_CTL_MODE_SLEEP) {
> +               control_value &= ~HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;

You do this in both branches of the conditional

> +               control_value |= HIBMC_PW_MODE_CTL_OSC_INPUT(0) &
> +                                HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
> +       } else {
> +               control_value &= ~HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
> +               control_value |= HIBMC_PW_MODE_CTL_OSC_INPUT(1) &
> +                                HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
> +       }

I think you could simplify this by adding a new local.

unsigned int input = 1;

if (power_mode == HIBMC_PW_MODE_CTL_MODE_SLEEP)
        input = 0;

control_value = readl(mmio + HIBMC_POWER_MODE_CTRL);
control_value &= ~(HIBMC_PW_MODE_CTL_MODE_MASK |
                   HIBMC_PW_MODE_CTL_OSC_INPUT_MASK);
control_value |= HIBMC_PW_MODE_CTL_MODE(power_mode) &
                 HIBMC_PW_MODE_CTL_MODE_MASK;
control_value |= HIBMC_PW_MODE_CTL_OSC_INPUT(input) &
                 HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;


> +       /* Program new power mode. */
> +       writel(control_value, mmio + HIBMC_POWER_MODE_CTRL);
> +}
> +
> +static unsigned int hibmc_get_power_mode(struct hibmc_drm_device *hidev)
> +{
> +       void __iomem   *mmio = hidev->mmio;
> +
> +       return (readl(mmio + HIBMC_POWER_MODE_CTRL) &
> +               HIBMC_PW_MODE_CTL_MODE_MASK) >> HIBMC_PW_MODE_CTL_MODE_SHIFT;

nit: You're doing a lot of work in the return statement here.

> +}
> +
> +void hibmc_set_current_gate(struct hibmc_drm_device *hidev, unsigned int gate)
> +{
> +       unsigned int gate_reg;
> +       unsigned int mode;
> +       void __iomem   *mmio = hidev->mmio;
> +
> +       /* Get current power mode. */

nit: try to avoid comments that don't add value

> +       mode = hibmc_get_power_mode(hidev);
> +
> +       switch (mode) {
> +       case HIBMC_PW_MODE_CTL_MODE_MODE0:
> +               gate_reg = HIBMC_MODE0_GATE;
> +               break;
> +
> +       case HIBMC_PW_MODE_CTL_MODE_MODE1:
> +               gate_reg = HIBMC_MODE1_GATE;
> +               break;
> +
> +       default:
> +               gate_reg = HIBMC_MODE0_GATE;
> +               break;
> +       }
> +       writel(gate, mmio + gate_reg);
> +}
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
> new file mode 100644
> index 0000000..e20e1aa
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
> @@ -0,0 +1,28 @@
> +/* Hisilicon Hibmc SoC drm driver
> + *
> + * Based on the bochs drm driver.
> + *
> + * Copyright (c) 2016 Huawei Limited.
> + *
> + * Author:
> + *     Rongrong Zou <zourongrong@xxxxxxxxxx>
> + *     Rongrong Zou <zourongrong@xxxxxxxxx>
> + *     Jianhua Li <lijianhua@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#ifndef HIBMC_DRM_POWER_H
> +#define HIBMC_DRM_POWER_H
> +
> +#include "hibmc_drm_drv.h"
> +
> +void hibmc_set_power_mode(struct hibmc_drm_device *hidev,
> +                         unsigned int power_mode);
> +void hibmc_set_current_gate(struct hibmc_drm_device *hidev,
> +                           unsigned int gate);
> +#endif
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
> new file mode 100644
> index 0000000..9c804ca
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
> @@ -0,0 +1,212 @@
> +/* Hisilicon Hibmc SoC drm driver
> + *
> + * Based on the bochs drm driver.
> + *
> + * Copyright (c) 2016 Huawei Limited.
> + *
> + * Author:
> + *     Rongrong Zou <zourongrong@xxxxxxxxxx>
> + *     Rongrong Zou <zourongrong@xxxxxxxxx>
> + *     Jianhua Li <lijianhua@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#ifndef HIBMC_DRM_HW_H
> +#define HIBMC_DRM_HW_H
> +
> +#define OFF 0
> +#define ON  1
> +#define DISABLE               0
> +#define ENABLE                1

These are not good names. I think you can probably hardcode the 0's
and 1's in the code instead of these. However, if you want to use
them, at least add a HIBMC_ prefix

> +
> +/* register definition */
> +#define HIBMC_MISC_CTRL                                0x4
> +
> +#define HIBMC_MSCCTL_LOCALMEM_RESET(x)         ((x) << 6)
> +#define HIBMC_MSCCTL_LOCALMEM_RESET_MASK       0x40
> +
> +#define RESET                0
> +#define NORMAL               1

Same naming nit here. Add a prefix

> +
> +#define HIBMC_CURRENT_GATE                     0x000040
> +#define HIBMC_CURR_GATE_DISPLAY(x)             ((x) << 2)
> +#define HIBMC_CURR_GATE_DISPLAY_MASK           0x4
> +
> +#define HIBMC_CURR_GATE_LOCALMEM(x)            ((x) << 1)
> +#define HIBMC_CURR_GATE_LOCALMEM_MASK          0x2
> +
> +#define HIBMC_MODE0_GATE                       0x000044
> +#define HIBMC_MODE1_GATE                       0x000048
> +#define HIBMC_POWER_MODE_CTRL                  0x00004C
> +
> +#define HIBMC_PW_MODE_CTL_OSC_INPUT(x)         ((x) << 3)
> +#define HIBMC_PW_MODE_CTL_OSC_INPUT_MASK       0x8
> +
> +#define HIBMC_PW_MODE_CTL_MODE(x)              ((x) << 0)
> +#define HIBMC_PW_MODE_CTL_MODE_MASK            0x03
> +#define HIBMC_PW_MODE_CTL_MODE_SHIFT           0
> +
> +#define HIBMC_PW_MODE_CTL_MODE_MODE0           0
> +#define HIBMC_PW_MODE_CTL_MODE_MODE1           1
> +#define HIBMC_PW_MODE_CTL_MODE_SLEEP           2
> +
> +#define HIBMC_PANEL_PLL_CTRL                   0x00005C
> +#define HIBMC_CRT_PLL_CTRL                     0x000060
> +
> +#define HIBMC_PLL_CTRL_BYPASS(x)               ((x) << 18)
> +#define HIBMC_PLL_CTRL_BYPASS_MASK             0x40000
> +
> +#define HIBMC_PLL_CTRL_POWER(x)                        ((x) << 17)
> +#define HIBMC_PLL_CTRL_POWER_MASK              0x20000
> +
> +#define HIBMC_PLL_CTRL_INPUT(x)                        ((x) << 16)
> +#define HIBMC_PLL_CTRL_INPUT_MASK              0x10000
> +
> +#define OSC                                    0

Naming

> +#define TESTCLK                                        1

This doesn't seem to be used?

> +
> +#define HIBMC_PLL_CTRL_POD(x)                  ((x) << 14)
> +#define HIBMC_PLL_CTRL_POD_MASK                        0xC000
> +
> +#define HIBMC_PLL_CTRL_OD(x)                   ((x) << 12)
> +#define HIBMC_PLL_CTRL_OD_MASK                 0x3000
> +
> +#define HIBMC_PLL_CTRL_N(x)                    ((x) << 8)
> +#define HIBMC_PLL_CTRL_N_MASK                  0xF00
> +
> +#define HIBMC_PLL_CTRL_M(x)                    ((x) << 0)
> +#define HIBMC_PLL_CTRL_M_MASK                  0xFF
> +
> +#define HIBMC_CRT_DISP_CTL                     0x80200
> +
> +#define HIBMC_CRT_DISP_CTL_CRTSELECT(x)                ((x) << 25)
> +#define HIBMC_CRT_DISP_CTL_CRTSELECT_MASK      0x2000000
> +
> +#define CRTSELECT_VGA                0
> +#define CRTSELECT_CRT                1
> +
> +#define HIBMC_CRT_DISP_CTL_CLOCK_PHASE(x)      ((x) << 14)
> +#define HIBMC_CRT_DISP_CTL_CLOCK_PHASE_MASK    0x4000
> +
> +#define PHASE_ACTIVE_HIGH      0
> +#define PHASE_ACTIVE_LOW       1
> +
> +#define HIBMC_CRT_DISP_CTL_VSYNC_PHASE(x)      ((x) << 13)
> +#define HIBMC_CRT_DISP_CTL_VSYNC_PHASE_MASK    0x2000
> +
> +#define HIBMC_CRT_DISP_CTL_HSYNC_PHASE(x)      ((x) << 12)
> +#define HIBMC_CRT_DISP_CTL_HSYNC_PHASE_MASK    0x1000
> +
> +#define HIBMC_CRT_DISP_CTL_TIMING(x)           ((x) << 8)
> +#define HIBMC_CRT_DISP_CTL_TIMING_MASK         0x100
> +
> +#define HIBMC_CRT_DISP_CTL_PLANE(x)            ((x) << 2)
> +#define HIBMC_CRT_DISP_CTL_PLANE_MASK          4
> +
> +#define HIBMC_CRT_DISP_CTL_FORMAT(x)           ((x) << 0)
> +#define HIBMC_CRT_DISP_CTL_FORMAT_MASK         0x03
> +
> +#define HIBMC_CRT_FB_ADDRESS                   0x080204
> +
> +#define HIBMC_CRT_FB_WIDTH                     0x080208
> +#define HIBMC_CRT_FB_WIDTH_WIDTH(x)            ((x) << 16)
> +#define HIBMC_CRT_FB_WIDTH_WIDTH_MASK          0x3FFF0000
> +#define HIBMC_CRT_FB_WIDTH_OFFS(x)             ((x) << 0)
> +#define HIBMC_CRT_FB_WIDTH_OFFS_MASK           0x3FFF
> +
> +#define HIBMC_CRT_HORZ_TOTAL                   0x08020C
> +#define HIBMC_CRT_HORZ_TOTAL_TOTAL(x)          ((x) << 16)
> +#define HIBMC_CRT_HORZ_TOTAL_TOTAL_MASK                0xFFF0000
> +
> +#define HIBMC_CRT_HORZ_TOTAL_DISPLAY_END(x)    ((x) << 0)
> +#define HIBMC_CRT_HORZ_TOTAL_DISPLAY_END_MASK  0xFFF
> +
> +#define HIBMC_CRT_HORZ_SYNC                    0x080210
> +#define HIBMC_CRT_HORZ_SYNC_WIDTH(x)           ((x) << 16)
> +#define HIBMC_CRT_HORZ_SYNC_WIDTH_MASK         0xFF0000
> +
> +#define HIBMC_CRT_HORZ_SYNC_START(x)           ((x) << 0)
> +#define HIBMC_CRT_HORZ_SYNC_START_MASK         0xFFF
> +
> +#define HIBMC_CRT_VERT_TOTAL                   0x080214
> +#define HIBMC_CRT_VERT_TOTAL_TOTAL(x)          ((x) << 16)
> +#define HIBMC_CRT_VERT_TOTAL_TOTAL_MASK                0x7FFF0000
> +
> +#define HIBMC_CRT_VERT_TOTAL_DISPLAY_END(x)    ((x) << 0)
> +#define HIBMC_CRT_VERT_TOTAL_DISPLAY_END_MASK  0x7FF
> +
> +#define HIBMC_CRT_VERT_SYNC                    0x080218
> +#define HIBMC_CRT_VERT_SYNC_HEIGHT(x)          ((x) << 16)
> +#define HIBMC_CRT_VERT_SYNC_HEIGHT_MASK                0x3F0000
> +
> +#define HIBMC_CRT_VERT_SYNC_START(x)           ((x) << 0)
> +#define HIBMC_CRT_VERT_SYNC_START_MASK         0x7FF
> +
> +/* Auto Centering */
> +#define HIBMC_CRT_AUTO_CENTERING_TL            0x080280
> +#define HIBMC_CRT_AUTO_CENTERING_TL_TOP(x)     ((x) << 16)
> +#define HIBMC_CRT_AUTO_CENTERING_TL_TOP_MSK    0x7FF0000
> +
> +#define HIBMC_CRT_AUTO_CENTERING_TL_LEFT(x)    ((x) << 0)
> +#define HIBMC_CRT_AUTO_CENTERING_TL_LEFT_MSK   0x7FF
> +
> +#define HIBMC_CRT_AUTO_CENTERING_BR            0x080284
> +#define HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM(x)  ((x) << 16)
> +#define HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM_MASK        0x7FF0000
> +
> +#define HIBMC_CRT_AUTO_CENTERING_BR_RIGHT(x)   ((x) << 0)
> +#define HIBMC_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF
> +
> +/* register to control panel output */
> +#define DISPLAY_CONTROL_HISILE                 0x80288
> +
> +#define HIBMC_RAW_INTERRUPT                    0x80290
> +#define HIBMC_RAW_INTERRUPT_VBLANK(x)          ((x) << 2)
> +#define HIBMC_RAW_INTERRUPT_VBLANK_MASK                0x4
> +
> +#define HIBMC_RAW_INTERRUPT_EN                 0x80298
> +#define HIBMC_RAW_INTERRUPT_EN_VBLANK(x)       ((x) << 2)
> +#define HIBMC_RAW_INTERRUPT_EN_VBLANK_MASK     0x4
> +
> +/* register and values for PLL control */
> +#define CRT_PLL1_HS                            0x802a8
> +#define CRT_PLL1_HS_25MHZ                      0x23d40f02
> +#define CRT_PLL1_HS_40MHZ                      0x23940801
> +#define CRT_PLL1_HS_65MHZ                      0x23940d01
> +#define CRT_PLL1_HS_78MHZ                      0x23540F82
> +#define CRT_PLL1_HS_74MHZ                      0x23941dc2
> +#define CRT_PLL1_HS_80MHZ                      0x23941001
> +#define CRT_PLL1_HS_80MHZ_1152                 0x23540fc2
> +#define CRT_PLL1_HS_108MHZ                     0x23b41b01
> +#define CRT_PLL1_HS_162MHZ                     0x23480681
> +#define CRT_PLL1_HS_148MHZ                     0x23541dc2
> +#define CRT_PLL1_HS_193MHZ                     0x234807c1
> +
> +#define CRT_PLL2_HS                            0x802ac
> +#define CRT_PLL2_HS_25MHZ                      0x206B851E
> +#define CRT_PLL2_HS_40MHZ                      0x30000000
> +#define CRT_PLL2_HS_65MHZ                      0x40000000
> +#define CRT_PLL2_HS_78MHZ                      0x50E147AE
> +#define CRT_PLL2_HS_74MHZ                      0x602B6AE7
> +#define CRT_PLL2_HS_80MHZ                      0x70000000
> +#define CRT_PLL2_HS_108MHZ                     0x80000000
> +#define CRT_PLL2_HS_162MHZ                     0xA0000000
> +#define CRT_PLL2_HS_148MHZ                     0xB0CCCCCD
> +#define CRT_PLL2_HS_193MHZ                     0xC0872B02
> +
> +/* Global macros */
> +#define RGB(r, g, b) \

Not used anywhere?

> +( \
> +       (unsigned long)(((r) << 16) | ((g) << 8) | (b)) \
> +)
> +
> +#define PADDING(align, data) (((data) + (align) - 1) & (~((align) - 1)))
> +

This is only used in hibmc_drm_de.c, move it in there. It might also
be nice to make it a type-checked function while you're at it.


> +#define MB(x) ((x) << 20)
> +

This is only used in 2 places, I think you can just hardcode the value
in their respective #defines

> +#endif
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux