On Wed, Nov 09, 2016 at 11:45:05AM +0000, Jon Medhurst (Tixy) wrote: > On Tue, 2016-11-08 at 18:24 +0000, Russell King - ARM Linux wrote: > > On Tue, Nov 08, 2016 at 05:20:36PM +0000, Jon Medhurst (Tixy) wrote: > > > On Tue, 2016-11-08 at 13:34 +0000, Russell King - ARM Linux wrote: > > > > On Tue, Nov 08, 2016 at 01:32:15PM +0000, Russell King - ARM Linux wrote: > > > > > Unfortunately, my drm-tda998x-devel branch is slightly out of date with > > > > > these patches it's the original set of 10 patches. I've not pushed > > > > > these ones out to that branch yet, as I've three additional patches on > > > > > top of these which aren't "ready" for pushing out. > > > > > > > > Here's the delta between the branch and what I just posted: > > > > > > > > diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c > > > [...] > > > > > > I have a working setup for HDMI audio on Juno an would like to test this > > > series but am struggling to work out which patches to apply in what > > > order to what branch, can you be specific? (I've tried various > > > combinations of patches series from the list, drm-tda998x-devel, and the > > > diff you posted) > > > > Hmm, I guess this is going to be annoyingly rather difficult then. > > The structure of my git tree is: > > > > v4.8 ---------------- mali patch ------------------ merge --- these patches > > v4.7 -- tda998x audio patches (up to df0bd1e8f3c5) --^ > > > > which makes it rather difficult to send out a series that people can > > apply as patches without first replicating that merge. I guess the > > answer is... use the _patches_ for review, and I'll push out the > > changes into drm-tda998x-devel... should be there soon. Look for > > commit hash d61fa2e50f2a. (Bah, slow 'net connections.) > > Testing gets more complicated as I'm using 4.9-rc? which has a DMA fix > needed for audio [1] and breaks hdmi-codec which I hope I fixed [2]. Well, ultimately it's going to be merged during the 4.10 merge window, so it's going to be combined with lots of other changes along the way. I'm testing it against 4.8 on the Dove Cubox, and build testing it against 4.9-rc, so it's good someone is hardware testing with 4.9-rc merged. > Anyway, I merged in drm-tda998x-devel and audio continued to work on my > HDMI connected monitor. So I guess that's > > Tested-by: Jon Medhurst <tixy@xxxxxxxxxx> Thanks. > I also reviewed the patches in this series. They look like a mostly > mechanical code organisation improvement, and whilst I'm not very > familiar with the driver and DRM, the other actual code changes look OK > too. So, FWIW: Yes, much of it is a code reorganisation, its mainly preparation for converting the driver to be DRM bridge based, but in reviewing the initial DRM bridge conversion patch, I spotted some weaknesses in the existing code which the first few patches of this series address. I don't think they're serious enough to warrant submission into -rc though. The next three patches I'll post in the coming days (once I've finished evaluating one of them) should reduce power consumption of the device by shutting down some blocks we never use, and some preparation to support CEC (I've had CEC working with Hans Verkil's patches for some time now, I'm mostly waiting for the CEC core to move out of staging, at which point it can end up in a saner place other than drivers/gpu/drm/i2c.) > Acked-by: Jon Medhurst <tixy@xxxxxxxxxx> Thanks, and thanks for testing. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
