Re: [PATCH] drm/rockchip: analogix_dp: add supports for regulators in edp IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/28/2016 05:29 PM, Randy Li wrote:


On 10/28/2016 05:11 PM, Shawn Lin wrote:
On 2016/10/23 3:18, Randy Li wrote:
I found if eDP_AVDD_1V0 and eDP_AVDD_1V8 are not been power at
RK3288, once trying to enable the pclk clock, the kernel would dead.
This patch would try to enable them first. The eDP_AVDD_1V8 more
likely to be applied to eDP phy, but I have no time to confirmed
it yet.

Comfirm it or at least someone should be able to answer your
question, Mark?
I just forget to ask the IC department, the TRM didn't cover that.
The IC staff have told me that the AVDD_1V8 is for phy, but AVDD_1V0 is for both of them. I should find a way to make the power sequence correctly. I am a little busy recently, a new patch would not be available in a short time.

Have you considered to add some details about vcc-supply and vccio-
supply for your analogix_dp-rockchip.txt ?

From your commit msg, these two properties are more likely to be
required but the code itself tell me them should be optional(from the
point of backward compatibility, it should also be optinoal).
Yes, I keep it optional for the same reason. Most of boards won't turn off those power supply and may use some fixed regulators.


Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
---
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 25
+++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 8548e82..6bf0441 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -17,6 +17,7 @@
 #include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/clk.h>

@@ -70,6 +71,7 @@ struct rockchip_dp_device {
     struct clk               *grfclk;
     struct regmap            *grf;
     struct reset_control     *rst;
+    struct regulator_bulk_data supplies[2];

     struct work_struct     psr_work;
     spinlock_t         psr_lock;
@@ -146,6 +148,13 @@ static int rockchip_dp_poweron(struct
analogix_dp_plat_data *plat_data)

     cancel_work_sync(&dp->psr_work);

+    ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
+            dp->supplies);
+    if (ret) {
+        dev_err(dp->dev, "failed to enable vdd supply %d\n", ret);
+        return ret;
+    }
+
     ret = clk_prepare_enable(dp->pclk);
     if (ret < 0) {
         dev_err(dp->dev, "failed to enable pclk %d\n", ret);
@@ -168,6 +177,9 @@ static int rockchip_dp_powerdown(struct
analogix_dp_plat_data *plat_data)

     clk_disable_unprepare(dp->pclk);

+    regulator_bulk_disable(ARRAY_SIZE(dp->supplies),
+            dp->supplies);
+
     return 0;
 }

@@ -323,6 +335,19 @@ static int rockchip_dp_init(struct
rockchip_dp_device *dp)
         return PTR_ERR(dp->rst);
     }

+    dp->supplies[0].supply = "vcc";
+    dp->supplies[1].supply = "vccio";
+    ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dp->supplies),
+            dp->supplies);
+    if (ret < 0) {
+        dev_err(dev, "failed to get regulators: %d\n", ret);
+    }
+    ret = regulator_bulk_enable(ARRAY_SIZE(dp->supplies),
+            dp->supplies);
+    if (ret < 0) {
+        dev_err(dev, "failed to enable regulators: %d\n", ret);
+    }
+
     ret = clk_prepare_enable(dp->pclk);
     if (ret < 0) {
         dev_err(dp->dev, "failed to enable pclk %d\n", ret);





_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux